Gigastone 120GB 2.5" SATA internal SSD
- Internal SSD
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
500 GB SATA internal SSD with 520 MB/s read and 480 MB/s write, 256 TBW and 1500000-hour MTBF
The Gigastone 500GB SATA III 2.5" SSD uses 3D NAND with SLC cache to deliver sequential read speeds up to 520 MB/s and write speeds up to 480 MB/s. It is designed as a direct replacement for traditional hard drives in desktops, laptops and ultra-slim notebooks. The 7mm form factor fits standard 2.5" drive bays.
Verify that your system has a free SATA III 6Gb/s port and a 2.5" drive bay that accepts a 7mm (0.28 inch) height drive. The drive draws a maximum of 4.0W active and 30 mW idle, so ensure your power supply can provide a SATA power connector. No additional heatsink is required or included.
Under sustained workloads the drive maintains random 4KB read performance of 95000 IOPS and write performance of 90000 IOPS. It is rated for 256 TBW and an MTBF of 1,500,000 hours, indicating consistent operation over long periods. Shock and vibration resistance further support reliability during continuous use.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Gigastone |
| Product line | Solid State Drive |
| Total capacity | 500 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 520 MB/s |
| Sequential write speed | Up to 480 MB/s |
| Sustained random 4KB read | 95000 |
| Sustained random 4KB write | 90000 |
| Random read (4K) | 95000 |
| Random write (4K) | 90000 |
| Storage | |
| NAND flash type | 3D NAND |
| Write endurance | 256 TB |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | Max. 30 mW |
| Active power draw | Average: 2.5 W Maximum: 4.0 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Heat sink | Without HeatSink |
| Overall height | 10.16 mm |
| Overall width | 69.85 mm |
| Product depth | 100 mm |
| Product weight | 35.45g |
| Environment & compliance | |
| Max shock tolerance | 1500G |
| More details | |
| Mean time between failures | 1,500,000 h |
Other versions of this model
The drive is a bare 2.5 inch 7mm SATA SSD; mounting brackets and SATA data or power cables are not included and must be sourced separately.
At 500GB with 256TBW endurance and 3D NAND, this capacity suits a primary boot drive holding the operating system and everyday applications.
The 520 MB/s figure is the SATA III interface ceiling; real-world throughput depends on the host controller, cable quality and workload, but sequential reads approach that limit on modern SATA ports.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?