Gigastone Corporation 250GB 2.5" SATA internal SSD
- Internal SSD
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2.5 inch SATA internal SSD with 120GB capacity, 3D NAND and read speeds up to 500 MB/s for faster boot and load times
This 2.5 inch drive uses 3D NAND and a SATA III interface to deliver sequential reads up to 500 MBps and writes up to 420 MBps. It fits laptops, desktops and ultra-slim notebooks with a 7 mm z-height. The drive is intended as a direct replacement for a mechanical hard disk.
Without a heatsink the drive runs passively, so it adds no fan noise to the system. Shock and vibration resistance protect data in mobile use. The SATA link keeps power consumption modest during typical desktop and laptop workloads.
Sustained random 4 KB reads reach 95000 IOPS and writes reach 90000 IOPS. The 3D NAND with SLC cache maintains these rates during extended transfers. Endurance is rated at 64 TB written and an MTBF of 1500000 hours.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Gigastone |
| Product line | Solid State Drive |
| Model name | Solid State Drive |
| Part number | GS-SSD-120 GB-1-1PK-B |
| Total capacity | 120 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 500 MB/s |
| Sequential write speed | Up to 420 MB/s |
| Sustained random 4KB read | 95000 |
| Sustained random 4KB write | 90000 |
| Random read (4K) | 95000 |
| Random write (4K) | 90000 |
| Storage | |
| NAND flash type | 3D NAND |
| Write endurance | 64 TB |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | Max. 30 mW |
| Active power draw | Average: 2.5 W Maximum: 4.0 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Heat sink | Without HeatSink |
| Overall height | 10.16 mm |
| Overall width | 69.85 mm |
| Product depth | 100 mm |
| Product weight | 45.35g |
| Environment & compliance | |
| Max shock tolerance | 1500G |
| More details | |
| Mean time between failures | 1,500,000 h |
Other versions of this model
Slide the drive into the 2.5" bay, connect the SATA data and power cables, then secure it with the caddy screws; the 7mm height fits ultra-slim notebooks without a spacer.
The drive is rated for 64TB total bytes written, so typical consumer workloads will take several years before the NAND wears out.
After the SLC cache fills, sequential write speed settles at the native 3D NAND rate below the 420MB/s burst figure.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?