Gigastone 2-Pack 120GB 2.5" SATA internal SSD
- 120 GB
- 2.5 in (6.35 cm)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two 1 TB SATA 2.5" drives with 3D NAND deliver up to 520 MB/s read and 480 MB/s write for faster boots and app loads in laptops or desktops
Model 1TB (2 Pack)
This pack contains two 1TB 2.5-inch solid-state drives built with 3D NAND. They connect through the SATA interface and fit standard 7mm bays in notebooks, ultra-slim notebooks and desktop PCs. The drives are intended as a direct replacement for mechanical hard disks in consumer systems.
The 2.5-inch form factor measures 7mm thick and uses the standard SATA data and power connectors found in most laptops and desktops. No heatsink is fitted, so the drives sit flush in tight bays. Shock and vibration resistance protect data when the machine is moved, and the lack of moving parts keeps operation silent.
Sequential transfers peak at 520 MB/s read and 480 MB/s write, which is the practical ceiling of the SATA link. Random 4KB performance reaches 95,000 read and 90,000 write IOPS. The drives are rated for 500 TBW and a 1.5 million hour MTBF, with idle power as low as 30 mW and active power averaging 2.5W up to a 4.0W maximum.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Gigastone |
| Product line | Solid State Drive |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 520 MB/s |
| Sequential write speed | Up to 480 MB/s |
| Sustained random 4KB read | 95000 |
| Sustained random 4KB write | 90000 |
| Random read (4K) | 95000 |
| Random write (4K) | 90000 |
| Storage | |
| NAND flash type | 3D NAND |
| Write endurance | 500 TB |
| Ports & slots | |
| Interface type | SATA III |
| Power | |
| Idle power draw | Max. 30 mW |
| Active power draw | Average: 2.5 W Maximum: 4.0 W |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
| Heat sink | Without HeatSink |
| Overall height | 10.16 mm |
| Overall width | 69.85 mm |
| Product depth | 100 mm |
| Product weight | 45.35g |
| Environment & compliance | |
| Max shock tolerance | 1500G |
| More details | |
| Mean time between failures | 1,500,000 h |
Other versions of this model
Sequential read reaches 520 MB/s and sequential write reaches 480 MB/s, which is the practical ceiling of the SATA III link on this model.
Yes, the 7 mm (0.28 in) height matches the standard 2.5" bay used in most ultra-slim notebooks and desktops.
Connect the SATA data and power cables, secure the drive in the 2.5" bay, then initialise and format the new volume in Disk Management before use.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?