We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided PWM fan splitter cable, 4-pin female to four male connectors, 10 inches

HANNORD

HANNORD PWM Fan Splitter 1-to-4 Braided 10 in

SKU CH-EPQ5-R09TT

Connects four case fans to one motherboard header using a 10-inch braided cable with one 4-pin and three 3-pin outputs

  • Product colorBlack

Style 1 Pack

  • Connect four fans to one motherboard header
  • Braided sleeve protects wires and improves cable routing
  • One 4-pin and three 3-pin connectors for mixed fan support
  • Single tachometer line reports accurate RPM to the board
  • 10 inch length fits most desktop chassis layouts

PWM Fan Splitter 1-to-4 Braided 10 in

This HANNORD adapter splits one motherboard 4-pin header into four fan connections. It uses a black braided cable roughly 10 inches long with a single 4-pin female input and four male outputs. Builders who need extra case airflow from a single header will find it convenient.

Suits builders adding multiple fans to one header

The splitter carries only one RPM sense line, so only the fan on the 4-pin output reports speed to the motherboard. The other three 3-pin outputs run at the same PWM duty cycle without independent feedback. Systems that require per-fan speed monitoring or per-header current limits above what one header supplies should use a powered hub instead.

One 4-pin plus three 3-pin male connectors

Only the first male connector includes the yellow tachometer wire; the remaining three omit the RPM pin. This design lets the motherboard control all four fans from a single PWM signal while avoiding conflicting speed reports. Verify your header can deliver enough current for the total fan count before installing.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 94% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product colorBlack

Other versions of this model

5 more in the same range

Questions about this item

What motherboard header do I need free to plug in this 4-pin female connector?

You need one standard 4-pin PWM fan header on the motherboard to accept the splitter's female connector.

Will my existing 3-pin case fans run at full speed or stay under PWM control when connected to the three 3-pin male ends?

The three 3-pin male connectors lack the RPM wire, so those fans receive voltage control from the header and run at the same speed as the single 4-pin fan.

How can I confirm the splitter is reporting a correct RPM signal to the motherboard after installation?

Enter the BIOS or use monitoring software and verify that one fan header shows a stable RPM reading matching the 4-pin fan's speed.

More in Internal PSU & Riser Cables

Similar items