We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey 10 ft DisplayPort cable with gold-plated male connectors on both ends

Jansicotek

Jansicotek DP8KA1 DisplayPort cable 10 ft 8K 60 Hz 4K 144 Hz

SKU CH-YFNE-XHH48

A 10 ft DisplayPort 1.4 cable that carries 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HDR and multi-channel audio

  • Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz, 5K (5120 × 2880) @ 60 Hz /
  • Rated speedTest Value
  • Cable length10 ft (3.05 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Drives 8K 60 Hz visuals with 32.4 Gbit/s bandwidth
  • Handles 4K 144 Hz gaming through HBR10-rated throughput
  • Delivers 2K 240 Hz motion clarity via triple shielding
  • Carries 7.1-channel audio with gold-plated connectors
  • Reaches 10 ft without signal loss using solid copper conductors

8K 60 Hz DisplayPort 1.4 cable

This 10 ft male-to-male DisplayPort cable carries 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz using HBR10 bandwidth up to 32.4 Gbit/s. Gold-plated connectors, solid copper conductors and triple shielding protect signal integrity over the full length. It supports HDR, HDCP 2.2, MST and DSC for modern monitors and projectors. The cable is new and backwards compatible with earlier DisplayPort versions.

Suits high-refresh gaming and 8K productivity

Gamers targeting 4K 144 Hz or 2K 240 Hz and professionals driving 8K 60 Hz displays will get the required throughput. Builders needing longer runs beyond 10 ft or those whose devices only offer HDMI 2.1 ports cannot use this cable. Laptops limited to DisplayPort 1.2 will not reach the advertised 8K or high-refresh 4K modes.

HBR10 32.4 Gbit/s bandwidth rating

The single specification that decides compatibility is the HBR10 rating delivering 32.4 Gbit/s. This bandwidth enables 8K 60 Hz, 4K 144 Hz and 2K 240 Hz with DSC. If the source or sink does not support HBR10 or DSC, the maximum resolution and refresh rate will fall back to lower modes.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 70% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameDP8KA1
Product typeDisplayPort Cable
Product colorGrey
Performance
Rated speedTest Value
Display
Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz,
5K (5120 × 2880) @ 60 Hz / 30 Hz,
4K (4096 × 2160) @ 144 Hz / 120 Hz/60 Hz/30 Hz,
2K (2560 × 1440) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
1080p (1920 × 1080) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort 2.1 Cable 8K@60 Hz
Connector genderMale to Male
Size & build
Overall length10 ft (3.05 m)
Cable length10 ft (3.05 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

What does the 32.4 Gbit/s bandwidth rating mean for my monitor setup?

The 32.4 Gbit/s HBR10 rating lets you run 8K at 60 Hz or 4K at 144 Hz without compression, and supports 2K at 240 Hz for high-refresh gaming.

How does the DisplayPort 1.4 interface limit what I can actually run?

The cable uses DP 1.4 connectors rated for HBR10, so it caps at 32.4 Gbit/s — enough for 8K 60 Hz, 4K 144 Hz, or 2K 240 Hz, but not for uncompressed 8K above 60 Hz.

Will the 10 ft length and male-to-male plugs fit my PC-to-monitor run?

Yes — the 10 ft cable has male DisplayPort plugs on both ends, so it connects a DP-output graphics card directly to a DP-input monitor or projector.

More in DisplayPort Monitor Cables

Similar items