We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.0 adapter with SATA and dual IDE connectors plus USB A and USB C ports

Jansicotek

Jansicotek E19 USB 3.0 to SATA IDE USB C adapter with USB A port and 12V 2A power

SKU CH-VNVZ-FD2G9

Connects 2.5" and 3.5" SATA or IDE drives plus optical drives to USB 3.0 with simultaneous three-drive support and included 12V 2A power

  • Adapter typeUSB to IDE&SATA
  • Product colorBlack
  • DetailsAll in One Solution to Connect to Different Types of Interfa
  • In the boxAll in One Solution to Connect to Different Types of Interfa
  • Connect 2.5in or 3.5in SATA and IDE drives via USB 3.0
  • Power 3.5in drives externally with included 12V 2A adapter
  • Access three drives simultaneously through dual IDE and SATA connectors
  • Plug-and-play on Windows, Mac and Linux without driver installation
  • Transfer data at up to 5Gbps with USB 3.0 backward compatibility

Universal 2.5/3.5 inch SATA IDE adapter

This Jansicotek E19 adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port. It also supports 5.25in optical drives such as DVD-ROM, CD-ROM, CD-RW, DVD-RW and DVD+RW. The dual-head IDE connector uses 40pin and 44pin interfaces alongside one SATA III connector. It is compatible with Windows Vista, 7, 8.1, 10, 11, Mac OS and Linux without requiring a driver.

Passive cooling with external 12V 2A power

The unit relies on passive cooling and draws power from the included 12V 2A external power adapter for 3.5in drives and optical devices. A 4pin power cable is supplied to feed the drive directly. Because no fan is present, operation is silent during normal use. The adapter maintains backward compatibility with USB 2.0 and USB 1.1 ports.

Three simultaneous drives and plug-and-play recovery

The bundled 12V 2A power adapter, 4pin power cable and the adapter itself allow up to three hard disk drives to be connected at the same time. This enables straightforward data retrieval, backup, cloning and recovery workflows. No driver installation is needed on supported operating systems, so the hardware is ready to use immediately after connection.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 70% of the 1,721 comparable items (median $22.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameE19
Product colorBlack
Adapter typeUSB to IDE&SATA

Questions about this item

How do I connect a 3.5" IDE drive to the Jansicotek E19 without it failing to appear?

Use the 40-pin IDE connector and the 4-pin power cable, then plug in the 12V 2A adapter before connecting the USB 3.0 cable to the computer.

Which parts of the Jansicotek E19 are most likely to wear out and need replacing?

The 4-pin Molex power cable and the USB 3.0 cable see the most plug cycles; the 12V 2A power brick can also degrade after years of continuous use.

What transfer-speed limit will I hit first when copying large batches of files with the Jansicotek E19?

The USB 3.0 interface caps sustained throughput at 5 Gbps, so mechanical drive speed or that bus ceiling will be the bottleneck.

More in SATA, IDE & M.2 Drive Adapters

Similar items