We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort to DisplayPort male-to-male fiber optic cable, 66 ft long with gold-plated connectors

Jansicotek

Jansicotek TJ-A022 DisplayPort cable 66 ft 8K 60 Hz 4K 144 Hz 32.4 Gbps

SKU CH-8XMK-411SW

A 66 ft fibre-optic DisplayPort 1.4 cable carries 8K at 60 Hz or 4K at 144 Hz with 32.4 Gbps bandwidth

  • Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K
  • Rated speedSupports up to 32.4 Gbit/s bandwidth.
  • Cable length66 ft (20.1 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 66 ft.

  • Transmits 8K at 60 Hz over 66 ft with zero signal loss
  • Delivers 4K at 144 Hz for fluid gaming on distant displays
  • 4 Gbps bandwidth via hybrid glass-fiber and copper construction
  • Gold-plated connectors resist corrosion for long-term reliability
  • TPE jacket withstands in-wall installation and daily handling

Long-distance DisplayPort 1.4 link

The Jansicotek TJ-A022 is a 66 ft fibre-optic DisplayPort 1.4 cable built for runs that exceed ordinary copper limits. It connects a DisplayPort-equipped PC or laptop to a monitor, projector or HDTV where the display sits far from the source.

Thermals noise and power draw

Fibre-optic construction eliminates electromagnetic interference and the signal degradation copper suffers beyond 33 ft. The hybrid glass-fibre and oxygen-free copper design draws negligible power from the port and runs silently without active components.

Bandwidth and resolution ceiling

Rated for 32.4 Gbps HBR3 bandwidth, the cable supports 8K at 60 Hz and 4K at 144 Hz while remaining backward compatible with 2K and 1080p signals. It is not suited for installations that require a shorter passive copper cable or a different connector type.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $58.99
Pricier than about 85% of the 3,804 comparable items (median $15.99).
Refresh frequency Support 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Higher than about 60% of the 648 comparable items (median 60 Hz).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A022
Product typeDisplayPort
Product colorBlack
Performance
Rated speedSupports up to 32.4 Gbit/s bandwidth.
Display
Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort( Male to Male)
Connector genderMale to Male
Size & build
Overall length66 ft (20.1 m)
Cable length66 ft (20.1 m)
Conductor typeTriple-shielded
Compatibility
Supported platformsCertified for Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 66 ft fiber-optic DisplayPort cable and which step do people often miss?

Connect the male DisplayPort 1.4 plugs to the GPU and monitor, then verify the source and sink ends match the marked direction; the cable only carries signal one way, so reversing it yields no picture.

What maintenance or replacement will the 66 ft hybrid fiber cable need later?

The glass fibers and gold-plated connectors are sealed inside a TPE jacket; no user service is required unless physical damage occurs, in which case the entire cable must be replaced.

What limit appears first on the 66 ft run during sustained 8K 60 Hz or 4K 144 Hz use?

The link is rated for 32.4 Gbps HBR3 bandwidth; if the source attempts higher rates such as 4K 240 Hz with full chroma, the cable will drop frames or fall back to a lower mode.

More in DisplayPort Monitor Cables

Similar items