We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort to DisplayPort cable with gold connectors, sixteen feet long

Jansicotek

Jansicotek TJ-A077 DisplayPort cable 16 ft 8K@60Hz 4K@144Hz

SKU CH-0H88-3VTZJ

A 16 ft fiber-optic DisplayPort 1.4 cable for 8K at 60 Hz and 4K at 144 Hz at 32.4 Gbps

  • Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K
  • Rated speedSupports up to 32.4 Gbit/s bandwidth.
  • Cable length16 ft (4.88 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 16 Feet

  • Supports 8K resolution at 60 Hz for ultra-sharp visuals
  • Delivers 4K at 144 Hz for smooth high-refresh gaming
  • Fiber-optic design maintains signal integrity over 16 ft
  • 4 Gbps bandwidth handles demanding video formats
  • 24 K gold-plated connectors resist corrosion for lasting reliability

16 ft DisplayPort 1.4 fibre cable

This 16 ft fibre-optic DisplayPort cable carries 8K at 60 Hz and 4K at 144 Hz over a single male-to-male link. It is built for PC builders and AV installers who need long runs without signal loss. The hybrid glass-and-copper construction supports the full 32.4 Gbps bandwidth of the 1.4 standard. Directional connectors are marked for source and display ends.

Passive optical link runs cool and silent

Because the cable uses light for the high-speed lanes, it draws minimal power from the DisplayPort ports and generates no measurable heat. There are no active electronics or fans, so operation is completely silent. The triple-shielded design and 24K gold-plated contacts resist corrosion and maintain low contact resistance over time.

Directional ends and 3D support simplify setup

Each connector is labelled “Source” or “Display” to prevent reversed installation, which would break the link. The cable is certified for Windows Vista and carries 3D video formats natively. The wear-resistant TPE jacket and zinc-alloy shells protect the fibre cores during in-wall pulls and repeated reconnections.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $42.99
Pricier than about 78% of the 3,804 comparable items (median $15.99).
Refresh frequency Support 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Higher than about 60% of the 648 comparable items (median 60 Hz).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A077
Product typeDisplayPort
Product colorBlack
Performance
Rated speedSupports up to 32.4 Gbit/s bandwidth.
Display
Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort( Male to Male)
Connector genderMale to Male
Size & build
Overall length16 ft (4.88 m)
Cable length16 ft (4.88 m)
Conductor typeTriple-shielded
Compatibility
Supported platformsCertified for Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 16 ft fiber-optic DisplayPort cable so the 8K@60Hz signal works?

Plug the connector marked Source into the GPU and the one marked Display into the monitor; the hybrid glass-fiber plus copper design only carries the 32.4Gbps stream in that direction.

What part of the TJ-A077 cable is most likely to need replacement after years of use?

The 24K gold-plated DisplayPort 1.4 plugs can wear from repeated insertion; the TPE jacket and internal 4-core optical fiber are built for long-term in-wall runs.

What limit appears first when I run 4K@144Hz continuously over the full 16 ft length?

The 32.4Gbps bandwidth ceiling of the DisplayPort 1.4 link is reached before any signal loss occurs in the fiber-optic core.

More in DisplayPort Monitor Cables

Similar items