We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort-to-DisplayPort cable, slim optical fiber with gold-plated connectors, sixteen feet long

Jansicotek

Jansicotek TJ-A077 DisplayPort cable 16 ft 8K 60Hz 4K 144Hz HBR3 32.4Gbps optical fiber slim flexible

SKU CH-5RS8-A0T79

A 16 ft optical fibre DisplayPort 1.4 cable carrying 8K at 60 Hz or 4K at 144 Hz with 32.4 Gbps bandwidth

  • Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K
  • Rated speedSupports up to 32.4 Gbit/s bandwidth.
  • Cable length16 ft (4.88 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 16 Feet

  • Delivers 8K at 60 Hz across 16 ft using optical fibre
  • Drives 4K at 144 Hz for smooth high-refresh gaming
  • 4 Gbps bandwidth handles uncompressed HDR video
  • 24 K gold-plated connectors resist corrosion for lasting contact
  • Hybrid glass-fibre and copper build stays slim and flexible

Jansicotek TJ-A077 optical DisplayPort cable

The Jansicotek TJ-A077 is a 16 ft optical fiber DisplayPort 1.4 cable rated for HBR3 bandwidth of 32.4 Gbps. It delivers 8K resolution at 60 Hz and 4K at 144 Hz while remaining backward compatible with 2K and 1080P signals. The hybrid construction uses four glass fibers plus oxygen-free copper wires inside a wear-resisting TPE jacket with 24K gold-plated connectors. It suits gamers and professionals who need long-distance, high-refresh video without signal loss.

Check your ports and directional installation

Verify that both your source and display have full-size DisplayPort 1.4 sockets capable of HBR3 speeds to reach the stated resolutions. The cable is directional: one connector is marked Source for the GPU or media player and the other Display for the monitor, so plan the routing before pulling it through walls or conduit. Because the link is optical, ensure the connectors seat firmly; a loose fit can break the light path even if the copper pins touch.

Passive optical link runs cool and silent

With no active electronics in the cable body, the link draws negligible power from the DisplayPort port and generates no audible noise or measurable heat during normal operation. The gold-plated shells resist corrosion and the TPE jacket remains flexible for tidy cable management. There are no fans, pumps or thermal throttling concerns to monitor.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $42.99
Pricier than about 78% of the 3,804 comparable items (median $15.99).
Refresh frequency Support 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Higher than about 60% of the 648 comparable items (median 60 Hz).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A077
Product typeDisplayPort
Product colorBlack
Performance
Rated speedSupports up to 32.4 Gbit/s bandwidth.
Display
Refresh frequencySupport 4K@144 Hz and 8K@60 Hz( backward compatible with 2K and 1080P resolutions.)
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort( Male to Male)
Connector genderMale to Male
Size & build
Overall length16 ft (4.88 m)
Cable length16 ft (4.88 m)
Conductor typeTriple-shielded
Compatibility
Supported platformsCertified for Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Does the TJ-A077 cable include both the Source and Display connectors in the box, or must I purchase a separate adapter?

The cable has a DisplayPort 1.4 male connector on each end, labelled Source and Display, so no extra adapter is needed.

Should I choose the 16 ft length for an 8K 60 Hz setup, or is a shorter run required?

The 16 ft optical-fiber cable supports 8K at 60 Hz and 4K at 144 Hz at full length without signal loss.

What does the 32.4 Gbps rating mean when I connect a 4K 144 Hz monitor?

It provides the full HBR3 bandwidth needed for 4K 144 Hz uncompressed video and backward compatibility with DP 1.2.

More in DisplayPort Monitor Cables

Similar items