Jansicotek TJ-A077 DisplayPort cable 164 ft 8K 60 Hz 4K 144 Hz 32.4 Gbps

164 ft DisplayPort 1.4 fiber cable for 8K 60 Hz

This 164 ft active optical DisplayPort 1.4 cable carries 8K at 60 Hz and 4K at 144 Hz over a hybrid glass-fiber and copper construction. It supports up to 32.4 Gbps bandwidth with HBR3 and DSC 1.2. The cable is aimed at installers and enthusiasts who need long-distance links between a graphics card or projector and a monitor without signal loss. Male-to-male connectors with 24K gold-plated contacts complete the assembly.

Check source and display port direction before

The cable uses a directional hybrid design: one connector is marked Source for the GPU or media player and the other is marked Display for the monitor or projector. Verify that both devices provide standard DisplayPort 1.4 outputs and that the 164 ft route can accommodate the cable bend radius. The link is backward compatible with 2K and 1080P resolutions, but the Source and Display ends must not be reversed or the signal will not pass.

Triple-shielded TPE jacket with zinc-alloy shells

The cable features a wear-resisting TPE outer jacket over triple-shielded construction and a 4-core pure glass fiber core paired with oxygen-free copper wires. Zinc-alloy connector shells with a painted finish resist cracking during pulls through conduit. Gold-plated contacts resist corrosion for long-term reliability. The directional connectors require correct orientation at installation, so plan the pull direction before routing the 50 m length.