We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green braided DisplayPort 2.0 cable with gold male connectors, ten feet long

Jansicotek

Jansicotek TJ-A285 DisplayPort 2.0 cable 10 ft green

SKU CH-DENV-5KNTM

A 10 ft DisplayPort 2.0 cable carrying 80 Gbps bandwidth for 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz with HDR and triple shielding

  • Refresh frequency16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
  • Rated speedTest Value
  • Cable length10 ft (3.05 m)
  • Connector count1
  • Source connector1 x DisplayPort2.0
  • Destination connector1 x DisplayPort2.0
  • 80 Gbps bandwidth enables 16K at 60 Hz
  • 4K at 165 Hz refresh for smooth gaming
  • Triple shielding with 28 AWG copper resists interference
  • Backward compatible with DisplayPort 1.4, 1.3, 1.2, 1.1, 1.0
  • 24K gold connectors and double nylon braid for durability

DisplayPort 2.0 cable for ultra-high-resolution

This 10 ft DisplayPort 2.0 cable connects a source device to a monitor, projector or television. It supports resolutions up to 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz. The male-to-male connectors are gold plated and the cable uses a solid copper conductor with triple shielding. It is intended for gamers and professionals who need maximum bandwidth over a single link.

Bandwidth ceiling of the DisplayPort 2.0 interface

The cable is rated for 80 Gbps and complies with the DisplayPort 2.0 standard, including HBR3 transport, DSC 1.2a compression and HDCP 2.2. These specifications define the practical limit for uncompressed or visually lossless video at the listed refresh rates. Backward compatibility with DisplayPort 1.4, 1.3, 1.2, 1.1 and 1.0 means the cable will negotiate the highest common speed with older ports.

10 ft length decides reach and signal integrity

At 10 ft the cable fits typical desktop-to-monitor distances while maintaining the full 80 Gbps rating. Longer passive cables may not sustain the highest refresh rates at 16K or 8K. Buyers who need a longer run should consider an active or fibre-optic DisplayPort cable instead.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $15.99
Typical for this category: the median of 3,804 items is $15.99.
Refresh frequency 16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A285
Product typeDisplayPort Cable
Product colorGreen
Performance
Rated speedTest Value
Display
Refresh frequency16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort2.0
Destination connector1 x DisplayPort2.0
Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
Connector genderMale to Male
Size & build
Overall length10 ft (3.05 m)
Cable length10 ft (3.05 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

How do I decide which length of this green DisplayPort 2.0 cable fits my setup?

The cable measures 10 ft end to end, so measure the distance between your graphics card and monitor; if the run is shorter you will have slack, if it is longer you need a different length.

What does the 80 Gbps bandwidth actually deliver when I plug the cable into my PC and display?

It carries enough data for 16K at 60 Hz, 8K at 120 Hz, 4K at 240 Hz or 165 Hz, and 2K at 360 Hz, all with HDR and DSC 1.2a compression when the source and sink support those modes.

Which DisplayPort standard does the TJ-A285 implement and what practical limit does that set?

It implements DisplayPort 2.0, capping the link at 80 Gbps and enabling the full resolution and refresh-rate combinations listed above while remaining backward compatible with DP 1.4, 1.3, 1.2, 1.1 and 1.0 devices.

More in DisplayPort Monitor Cables

Similar items