Jansicotek TJ-A285BK DisplayPort 2.1 Cable 10 ft 240Hz 80Gbps 16K@30Hz HDR HBR3

DisplayPort 2.1 cable for 16K

This 10 ft DisplayPort 2.1 cable carries up to 80 Gbps bandwidth with HBR3 and DSC 1.2a support. It is built for users driving 16K at 30 Hz, 8K at 120 Hz, or 4K at 240 Hz from a compatible graphics card or laptop. The male-to-male connectors are 24K gold plated and the 28 AWG tinned copper conductors are triple shielded. It suits gamers and creators who need a single long link for ultra-high resolution or extreme refresh rates.

Build integration and backwards compatibility

The cable plugs directly into any DisplayPort 2.1, 2.0, 1.4, 1.3, 1.2, 1.1 or 1.0 port on a GPU, laptop or monitor without adapters. It frees up desk routing by delivering video, 7.1 uncompressed audio and HDR metadata through one 10 ft run. The buckle-free groove design eases removal in tight rear-I/O spaces. Buyers whose displays only offer HDMI or USB-C video inputs will need a different cable or an active adapter.

Sustained-load behaviour

Triple shielding and solid copper conductors maintain the full 80 Gbps link during extended gaming sessions without signal degradation or flicker. Forward error correction and DSC 1.2a keep 4K 240 Hz and 2K 360 Hz streams stable over the full length. The PVC jacket resists wear from repeated re-seating. Users running 16K 30 Hz or 8K 120 Hz continuously should verify their source and sink both support DSC and UHBR20 modes, as the cable alone cannot enable compression if the hardware lacks it.