We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green braided DisplayPort 2.0 cable with gold male connectors, 6.6 ft

Jansicotek

Jansicotek TJ-A285 displayport cable 6.6 ft green

SKU CH-R2BW-H8JB6

A green 6.6 ft DisplayPort 2.0 cable supporting 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz with 80 Gbps bandwidth, triple shielding and gold-plated connectors

  • Refresh frequency16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
  • Rated speedTest Value
  • Cable length6.6 ft (2.01 m)
  • Connector count1
  • Source connector1 x DisplayPort2.0
  • Destination connector1 x DisplayPort2.0
  • VESA certified DisplayPort 2.0 cable supports 80 Gbps bandwidth for lossless high-resolution video
  • Triple shielding with solid copper conductor resists EMI interference for stable signal transmission
  • 16K at 60 Hz and 8K at 120 Hz resolution support enables ultra-high-definition gaming and media
  • Backward compatible with DisplayPort 1.4, 1.3, 1.2, 1.1 and 1.0 devices for wide connectivity
  • Nylon braided jacket and 24K gold-plated connectors provide 10 times the durability of standard PVC cables

DisplayPort 2.0 cable for 80 Gbps setups

The Jansicotek TJ-A285 is a 6.6 ft male-to-male DisplayPort 2.0 cable rated for up to 80 Gbps bandwidth. It carries 16K at 60 Hz, 8K at 120 Hz and 4K at up to 240 Hz with HDR, HDCP 2.2 and DSC 1.2a. Green braided jacket and 24 K gold-plated connectors complete the link.

Gamers and creators chasing the highest refresh

This cable suits anyone driving a DisplayPort 2.0 monitor at 4K 165 Hz, 4K 240 Hz or 2K 360 Hz and wants certified 80 Gbps throughput. Builders connecting only DisplayPort 1.4 or older sources will not reach the advertised 16K or 8K 120 Hz modes because the host limits the link speed.

80 Gbps certified bandwidth decides the use case

VESA-certified 80 Gbps is the single figure that determines whether 16K 60 Hz, 8K 120 Hz or 4K 240 Hz can run without compression. If the graphics card or display tops out at a lower DisplayPort version, the cable will still work but the highest resolutions and refresh rates listed above will not be achievable.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $15.99
Typical for this category: the median of 3,804 items is $15.99.
Refresh frequency 16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameTJ-A285
Product typeDisplayPort Cable
Product colorGreen
Performance
Rated speedTest Value
Display
Refresh frequency16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort2.0
Destination connector1 x DisplayPort2.0
Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
Connector genderMale to Male
Size & build
Overall length6.56 ft (2 m)
Cable length6.6 ft (2.01 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Does the 6.6 ft cable generate heat or draw noticeable power during all-day gaming at 4K 240 Hz?

A passive DisplayPort 2.0 cable carries only the signal current required by the link; it has no active electronics, so it produces no measurable heat and adds no perceptible power draw even during continuous high-refresh use.

What must my graphics card and monitor already provide for this DP 2.0 cable to work at 80 Gbps?

Both the source and the display need a DisplayPort 2.0 port that supports UHBR 20 lanes; if either side is limited to DP 1.4 or earlier, the link will fall back to that version’s maximum bandwidth.

Will this green braided cable work with my older DP 1.2 monitor without signal loss?

Yes, the cable is backward compatible with DP 1.2, 1.3 and 1.4, so it will carry the monitor’s native resolution and refresh rate reliably while the triple shielding protects against interference.

More in DisplayPort Monitor Cables

Similar items