STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8K HDMI 2.1 cable delivering 48Gbps bandwidth for 8K at 60Hz and 4K at 120Hz over 25 feet with eARC and Dynamic HDR support
This 25‑foot Ultra High Speed HDMI cable carries 48Gbps bandwidth and supports uncompressed 8K resolution at 60Hz. It is built for installers and enthusiasts who need a long run between an 8K source and a compatible display or AV receiver. The CL2 rating means it meets in‑wall fire‑safety requirements for permanent installations.
A braided outer jacket protects the 24AWG conductors during pulls through conduit or behind furniture. Standard HDMI Type‑A plugs on both ends connect directly to TVs, projectors, game consoles or AV receivers without adapters. The cable also carries eARC for object‑based audio formats such as Dolby Atmos and DTS:X, simplifying audio return from a display to a sound system.
Confirm that both source and sink devices have HDMI 2.1 ports to unlock the full 48Gbps bandwidth and 8K@60Hz capability. Older HDMI ports will fall back to lower resolutions and refresh rates. At this length, ensure the run does not exceed the maximum distance your equipment supports for 8K signals without an active booster.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Adapter type | HDMI Cables |
The cable is rated for 48Gbps bandwidth, which caps practical output at 8K resolution at 60Hz or 4K at 120Hz without compression.
It uses a 24AWG conductor gauge, carries a CL2 fire rating for in‑wall installation, and has a braided jacket that adds modest bulk over bare PVC.
Connect the cable between an eARC‑labelled HDMI port on the TV and the eARC input on the soundbar or receiver, then enable eARC and pass‑through in both devices' audio menus — the step most often missed is turning on HDMI‑CEC control so the handshake completes.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?