KingSpec NX-128 2280 128GB PCIe 3.0 x4 NVMe 1.3 internal SSD
- Internal SSD
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
M.2 2280 NVMe drive with 256GB capacity, PCIe 3.0 x4 interface and up to 3200MB/s sequential read
The KingSpec NX-256 2280 is a 256GB internal solid-state drive built for consumer desktops and laptops. It uses the M.2 2280 form factor with a PCI-Express 3.0 x4 interface and NVMe 1.3 protocol. The drive employs 3D NAND flash for storage density and endurance.
The product ships as a bare drive without a heatsink, extra cables, cloning utilities or mounting hardware. Installation relies on the host system's M.2 slot and native NVMe driver support. Performance figures reflect the drive alone.
The drive offers 256GB of usable capacity and a terabytes-written rating of 120TB. Sequential speeds reach up to 3200 MBps read and 1600 MBps write. Random performance hits 380000 IOPS read and 320000 IOPS write.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | KingSpec |
| Product line | NX 2280 Series |
| Model name | NX-256 2280 |
| Part number | NX-256 2280 |
| Total capacity | 256 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 3,200 MB/s |
| Sequential write speed | Up to 1,600 MB/s |
| Random read (4K) | Up to 380,000 IOPS |
| Random write (4K) | Up to 320,000 IOPS |
| Storage | |
| NAND flash type | 3D NAND |
| Write endurance | 120 TB |
| Connectivity | |
| Connection protocol | NVMe 1.3 |
| Ports & slots | |
| Interface type | PCI-Express 3.0 x4 |
| Power | |
| Idle power draw | 0.71 W |
| Active power draw | 4.66 W |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | Without HeatSink |
| Overall height | 2.1 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 50g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -20 °C to 75 °C |
| Operating humidity range | 5-95% |
| More details | |
| Mean time between failures | 1,000,000 h |
Other versions of this model
The drive is rated for 120 TBW, so you can write up to 120 terabytes over its lifetime before the endurance limit is reached.
Sequential write speed caps at 1600 MBps, so sustained large-file transfers will hit that throughput ceiling before other limits.
Active power consumption is 4.66 W, so the drive draws that amount from the system during sustained operation.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?