STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts SD, HD and 3G-SDI signals to 1080P@60Hz HDMI with an SDI loop-through output and includes a power adapter
The LUOM micro converter translates 3G-SDI, HD-SDI and SD-SDI sources to a single HDMI output while passing the original SDI signal through a loop-out port for simultaneous monitoring. It is built for camera operators, CCTV installers and broadcast engineers who need reliable format bridging without software configuration. The unit ships with a dedicated power adapter and USB charge cable for immediate deployment.
The converter operates without fans, relying on its metal enclosure to dissipate heat during continuous 2.97 Gbps signal processing. Silent running makes it suitable for on-set audio environments, studio control rooms and installed security racks where acoustic noise must stay at zero. External power supply keeps the main body cool and eliminates internal switching-noise interference with sensitive video circuits.
This device converts SDI to HDMI and cannot reverse the signal path; buyers who need HDMI-to-SDI conversion must select a different unit. It supports input formats from 480i through 1080p at 24, 25, 30, 50 and 60 Hz, with HDMI 1.3 output matching those rates up to 1080p60. No RF, CVBS, AHD, TVI or CVI BNC signals are accepted.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | SDI to HDMI Converter |
| Ports & slots | |
| First connector | 1 x SDI input |
| Second connector | 1 x SDI output, 1 x HDMI output |
| In the box | |
| In the box | SDI to HDMI Converter * 1 USB Charge Cable * 1 Power Adapter * 1 User Manual * 1 |
Connect the SDI source to the single SDI input, attach the HDMI display to the HDMI output, and plug the supplied power adapter into the USB charge cable. The common mistake is assuming the converter draws power from the SDI or HDMI ports, but it requires the external power adapter to operate.
The unit has no user-serviceable parts or consumables. Maintenance is limited to keeping the BNC and HDMI connectors clean and checking the power adapter and USB cable for wear; replace the power adapter if it fails to deliver stable voltage.
The SDI data transfer rate is capped at 2.97 Gbps and the HDMI output at 1080P@60Hz, so the maximum supported resolution and frame rate is the first hard limit you will encounter during continuous operation.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?