STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts optical, coaxial or USB digital audio to analogue RCA and 3.5 mm outputs with a built-in headphone amplifier and volume control
The LUOM OZHL2 accepts Coaxial, Toslink and USB digital sources and converts them to stereo analog output through RCA and 3.5 mm jacks. It is intended for users who need to connect modern digital devices such as a PC, Blu-ray player or game console to a traditional amplifier or powered speakers. A built-in headphone amplifier drives loads from 32 to 600 ohm directly from the front-panel jack.
The unit draws power from the included USB cable and has no internal fan, so it runs silently in normal use. A rotary volume knob on the chassis adjusts the analog output level for both the RCA line output and the 3.5 mm headphone jack without software intervention. The headphone amplifier delivers 125 mW per channel into a 32 ohm load, providing adequate drive for most desktop headphones.
The supplied IR remote lets you switch between Coaxial, Toslink and USB inputs from the listening position. When USB is selected, the converter acts as a PC audio device; note that the USB port does not support playback from mass-storage devices such as USB flash drives. The package includes the converter, a USB power cable, the IR remote and a user manual.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | LUOM |
| Model name | OZHL2 |
| Product color | Black |
| In the box | |
| In the box | 1 X Digital to analog audio converter 1 X USB power cable 1 X IR Remote Control 1 X User Manual |
Connect the TV's optical or coaxial output to the matching input, set the TV audio output to PCM or LPCM, select the correct input on the converter, then plug headphones into the 3.5 mm jack; the step most people miss is changing the TV from Bitstream to PCM/LPCM.
The unit has no user-serviceable parts; keep the IR remote's battery fresh and ensure the USB power cable and connectors stay clean for reliable operation.
The built-in amplifier delivers 125 mW per channel into 32 ohms, so high-impedance or low-sensitivity headphones above 600 ohms will run out of volume before the converter overheats.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?