We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LUOM

LUOM TJ-A028 DisplayPort 1.4 Extension Cable 6.6 ft Male to Female 8K@60Hz 32.4Gbps HBR3

SKU CH-RZS6-W1CXE

Extends a DisplayPort 1.4 link 6.6 ft with 32.4 Gbps bandwidth for 8K at 60 Hz, 4K at 144 Hz, and 2K at 240 Hz

  • Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz, 5K (5120 × 2880) @ 60 Hz /
  • Rated speedTest Value
  • Cable length6.6 ft (2.01 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4

Cable Length 6.6 Feet

  • Extends existing cables 6.6 ft for flexible placement
  • 4 Gbps HBR3 bandwidth carries 8K 60 Hz signals
  • Triple shielding with solid copper resists interference reliably
  • Gold-plated connectors rated 10,000 insertions for lasting contact
  • Supports 4K 144 Hz and 2K 240 Hz gaming refresh rates

Extension Cable for Existing DisplayPort Links

This male-to-female DisplayPort 1.4 extension cable adds 6.6 ft of reach between a graphics card and a monitor. It carries HBR3 bandwidth up to 32.4 Gbit/s and supports resolutions up to 8K at 60 Hz, 4K at 144 Hz, and 2K at 240 Hz. The cable is built for builders who need extra length without replacing the primary cable. It is not for buyers who need a direct male-to-male cable or a different connector type.

Triple Shielding and Gold Connectors Reduce Wear

The 26–30 AWG solid copper conductors are wrapped in triple-layer shielding to resist interference over the extended run. Gold-plated terminals and a nylon braided jacket are rated for 10000+ insertion cycles, protecting both the cable and the host ports from repeated plugging. HDCP 2.2, HDR, DSC 1.2, FEC, and MST pass through unchanged. No software or drivers are bundled with the cable.

Verify Port Gender and Total Link Length Before

Ensure the source device has a female DisplayPort 1.4 receptacle and the display has a male DisplayPort 1.4 plug, or vice versa, to match the male-to-female orientation. Confirm that the combined length of the existing cable plus this 6.6 ft extension stays within the reliable signal distance for your target resolution and refresh rate. The cable is backwards compatible with DisplayPort 1.3, 1.2, and 1.1 links.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 80% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLUOM
Model nameTJ-A028
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz,
5K (5120 × 2880) @ 60 Hz / 30 Hz,
4K (4096 × 2160) @ 144 Hz / 120 Hz/60 Hz/30 Hz,
2K (2560 × 1440) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
1080p (1920 × 1080) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort 1.4 Cable 8K@60 Hz
Connector genderMale to Female
Size & build
Overall length6.56 ft (2 m)
Cable length6.6 ft (2.01 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Will the gold-plated connectors or braided jacket need replacement after heavy daily use?

The 24K gold-plated connectors and nylon braided jacket are rated for 10000+ plug cycles, so they should not need replacement under normal daily use.

At 6.6 ft length, what bandwidth or resolution limit appears first when pushing 8K@60Hz continuously?

The cable is HBR3 rated for 32.4 Gbps bandwidth, supporting 8K@60Hz (7680x4320) at full spec without compression limits at this length.

Does the triple-shielded solid copper construction run hot or draw extra power during all-day 4K@144Hz gaming sessions?

As a passive copper cable with triple shielding and solid conductors, it adds no active power draw and generates no measurable heat during sustained high-refresh operation.

More in DisplayPort Monitor Cables

Similar items