We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LUOM

LUOM TJ-A285 DisplayPort 2.0 cable 10 ft green

SKU CH-4KXY-EQDGK

A 10 ft DisplayPort 2.0 cable supporting 16K at 60 Hz, 8K at 120 Hz and 4K at 165 Hz with HDR and triple shielding

  • Refresh frequency16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
  • Rated speedTest Value
  • Cable length10 ft (3.05 m)
  • Connector count1
  • Source connector1 x DisplayPort2.0
  • Destination connector1 x DisplayPort2.0
  • Supports 16K at 60 Hz via 80 Gbps bandwidth
  • Handles 8K at 120 Hz and 4K at 240 Hz refresh rates
  • Triple-shielded 28 AWG copper with 30 000-bend braided jacket
  • 24 K gold-plated connectors resist tarnish and maintain conductivity
  • Backwards compatible with DP 1.4 and 1.2 displays

LUOM TJ-A285 DisplayPort 2.0 Cable

This LUOM TJ-A285 DisplayPort 2.0 cable connects a DisplayPort source to a compatible monitor over a 10 ft braided run. It supports resolutions up to 16K at 60 Hz and 4K at 165 Hz for high-refresh gaming or professional video work. The male-to-male design carries 80 Gbps bandwidth with HDR and HDCP 2.2 compliance. It suits builders who need a single long link without signal repeaters.

Installation and common issues

The cable is plug-and-play on Windows Vista and later systems with no driver installation required. Triple shielding and 28 AWG tinned copper conductors reduce interference during routing near power supplies. Gold-plated connectors resist oxidation over repeated mating cycles. The nylon braid withstands 30000-plus bend cycles but tight bends behind desk legs can still stress the connector hoods.

Sustained-load behaviour

Under continuous 16K 60 Hz or 4K 165 Hz output the solid copper conductors maintain stable throughput without thermal throttling. Dynamic HDR 4:4:4 colour data streams stay intact during hour-long gaming sessions or render jobs. The 80 Gbps headroom absorbs bandwidth spikes from variable refresh rates such as FreeSync or G-SYNC. It is not suited for runs exceeding the specified 10 ft length where signal integrity would degrade.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $18.99
Pricier than about 60% of the 3,804 comparable items (median $15.99).
Refresh frequency 16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
Typical for this category: the median of 648 items is 60 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameLUOM
Model nameTJ-A285
Product typeDisplayPort Cable
Product colorGreen
Performance
Rated speedTest Value
Display
Refresh frequency16K@60 Hz, 8K@120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz
Ports & slots
Connector count1
Source connector1 x DisplayPort2.0
Destination connector1 x DisplayPort2.0
Connector detailsDisplayPort to DisplayPort 2.0 Cable 16K@60 Hz
Connector genderMale to Male
Size & build
Overall length10 ft (3.05 m)
Cable length10 ft (3.05 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

How do I verify the cable is delivering 16K at 60 Hz after connecting it?

Check your GPU control panel or monitor OSD to confirm the active resolution reads 15360 x 8640 at 60 Hz with HDR enabled; the 80 Gbps bandwidth and triple shielding ensure stable transmission at that mode.

What comes in the box and do I need any extra adapters?

The package contains only the 10 ft male-to-male DisplayPort 2.0 cable with 24 K gold-plated connectors and a nylon braided jacket; no adapters or separate power are required for standard DP source-to-display connections.

Should I choose this 10 ft green version or a different length for my setup?

Select the 10 ft length when the source and display are up to three metres apart; the green braided jacket adds visibility and the same 80 Gbps performance applies regardless of colour.

More in DisplayPort Monitor Cables

Similar items