We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS SFF-8087 male to four SATA female breakout cable, braided 3.3 ft length

Manw

Manw SFF-8087 to 4 SATA Breakout Cable 3.3FT

SKU CH-SX09-20AKN

Connects a Mini SAS SFF-8087 host to four SATA drives with a 3.3 ft breakout cable

  • Connects RAID controller to four SATA drives
  • 36-pin Mini SAS SFF-8087 plugs into host
  • 3 ft length fits typical server chassis
  • Braided jacket protects cables during routing
  • Each SATA connector labelled for easy management

SFF-8087 to four SATA breakout cable

This 3.3 ft Manw cable splits a single internal Mini SAS SFF-8087 36-pin male connector into four SATA 7-pin female data ports. It links a SAS HBA or RAID controller to up to four SATA drives or a backplane. The forward breakout design carries up to 6 Gb/s per drive and uses thin braided wiring with labelled ends for tidy cable management.

Connects SAS host to SATA targets only

Suits builders attaching SATA hard drives or SSDs to a SAS controller or HBA with an SFF-8087 port. The cable will not work if the SFF-8087 side is plugged into a backplane or expander; it is strictly a host-to-target breakout. Users needing SATA-to-SAS reverse breakout or direct backplane connection must choose a different cable.

36-pin SFF-8087 male to four SATA 7-pin female

The host connector is a 36-pin Mini SAS SFF-8087 male with a locking latch; the four target connectors are standard SATA 7-pin female data ports. This pin-out and gender combination determines whether the cable matches your controller and drive interfaces.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $14.99
Pricier than about 55% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameManw

Questions about this item

What SAS controller or motherboard connector is required to use the SFF-8087 end?

The host side uses a 36-pin internal Mini SAS SFF-8087 male connector that plugs into a SAS HBA, RAID controller or motherboard with a matching SFF-8087 port.

Will the four SATA connectors work with older 3 Gb/s SATA drives I already own?

Yes, the breakout cable supports up to 6 Gb/s per drive and is backward compatible with slower SATA drives connected to the four 7-pin female SATA ports.

How can I verify each drive is linked at the correct speed after installation?

Check the controller BIOS or operating system disk utility; each of the four SATA targets should report a negotiated link speed up to 6 Gb/s when the cable is seated and the latch engaged.

More in SATA & eSATA Drive Cables

Similar items