We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1.5TB DDR5 5600 CL46 16x96GB ECC Registered RDIMM memory upgrade for Supermicro H14DST-F

SKU CH-4XH8-2BWB6

A 1.5 TB DDR5 ECC registered RDIMM kit of sixteen 96 GB modules running at 5600 MHz CL46 1.1 V for the Supermicro H14DST-F motherboard

  • Total capacity1.5 TB (16 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 1.5TB 16X96GB

Show 30 more
  • 5 TB total capacity from sixteen 96 GB modules
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC architecture corrects single-bit errors on the fly
  • 10 V operation matches the server memory controller specification
  • 288-pin RDIMM form factor fits the Supermicro H14DST-F motherboard

1.5 TB DDR5 RDIMM kit for Supermicro H14DST-F

This 1.5 TB kit contains sixteen 96 GB DDR5 5600 RDIMMs built to the exact rank, voltage and timing the Supermicro H14DST-F memory controller expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. It is designed for administrators who need maximum supported capacity on this specific platform.

Capacity and headroom

Sixteen dual-rank 96 GB modules deliver the full 1.5 TB the board can address when all 288-pin slots are filled. The 2Rx4 organisation and 1.10 V operating voltage keep the memory controller within spec at DDR5 5600. Systems that require more memory than this kit provides will need a different motherboard or platform.

DDR5 5600 registered interface limits

The DDR5 5600 (PC5 44800) registered interface runs at CL46 latency with a 1.1 V supply. Registered buffering removes electrical load from the controller so all sixteen slots operate at the rated frequency. Boards that only accept unbuffered UDIMMs or SODIMMs cannot use these modules, and platforms limited to lower DDR5 speeds will down-clock the kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $47,816.99
Pricier than about 96% of the 21,161 comparable items (median $397.99).
Total capacity 1.5 TB (16 × 96 GB)
Higher than about 97% of the 20,941 comparable items (median 32 GB).
Price per GB $31.88 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K16
Total capacity1.5 TB (16 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1.5 TB 16 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will this 16 x 96 GB DDR5 5600 RDIMM kit work in my Supermicro H14DST-F alongside any existing memory?

The kit is spec-matched to the H14DST-F population rules; install all 16 modules in the approved slots so the registered ECC architecture runs fully populated at 5600 MHz, 1.1 V, CL46.

How can I verify the kit is running as intended after installation?

In the BIOS or system firmware check that all 16 DIMMs report 96 GB each, DDR5 5600 speed, CL46 latency, 1.1 V operation and ECC active.

What does the 1.5 TB package contain and is anything else required?

The box includes the 16 x 96 GB DDR5 5600 2Rx4 288-pin ECC Registered RDIMM modules; no additional parts are needed for installation.

More in Model-Specific Memory Upgrades

Similar items