NEMIX RAM DDR5 4800 CL40 2TB 16x128GB ECC RDIMM Supermicro H13DSH memory upgrade
- 2 TB (16 × 128 GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2TB DDR5 5600 ECC Registered RDIMM kit of sixteen 128GB modules for Supermicro H13DSG-OM
Size 2TB 16X128GB
This NEMIX RAM kit provides 2 TB of DDR5 server memory in a 16 x 128 GB configuration. It is built for the Supermicro H13DSG-OM motherboard and uses registered ECC RDIMM modules that the board’s memory controller expects. The modules run at 5600 MT/s with CL46 timing at 1.1 V.
The registered design lets every slot run fully populated at rated capacity while ECC corrects single-bit errors on the fly. It is not for systems that require unbuffered UDIMMs or SODIMMs, and it does not fit boards that only support lower-density modules or different pin layouts.
Check the Supermicro H13DSG-OM manual for approved DIMM population order, maximum supported capacity per channel, and any BIOS version requirements before ordering. Ensure the 288-pin RDIMM form factor matches the board’s slot keying and that the 2Rx4 rank configuration aligns with the platform’s memory topology.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | NEMIX RAM Original Series Server Memory |
| Model name | DDR5 ECC RDIMM Registered Server Memory |
| Part number | MR44800-724K16 |
| Total capacity | 2 TB (16 × 128 GB) |
| Product type | 288-Pin DDR5 RDIMM |
| Performance | |
| Rated speed | DDR5 5600 (PC5 44800) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL46 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 2 TB 16 × 128 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT |
Other versions of this model
The kit is spec-matched to the H13DSG-OM memory-population rules and rated DDR5 5600 CL46 at 1.10V. Consult the motherboard manual for supported capacities, approved DIMM order and any BIOS updates required for full 16-DIMM recognition.
No. Registered (RDIMM) modules require a motherboard wired for registered memory; they will not function in UDIMM or SODIMM slots.
Enter the BIOS or use a tool such as CPU-Z to verify the memory frequency shows 5600 MT/s (PC5-44800) and CAS latency 46 with ECC active.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?