We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 288GB 6x48GB 5600MHz CL46 1.1V 2Rx8 Registered memory upgrade

SKU CH-9ZEC-CKNHS

A 288GB kit of six 48GB DDR5 ECC RDIMM modules running at 5600MHz CL46 1.1V 2Rx8, validated for the Supermicro H13DSG-OM motherboard

  • Total capacity288 GB (6 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 288GB 6X48GB

Show 30 more
  • 288 GB total capacity from six 48 GB modules for maximum server density
  • DDR5-5600 (PC5-44800) speed with CL46 latency runs at rated frequency
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation matches the board's memory controller specification exactly
  • Verified fitment for the Supermicro H13DSG-OM motherboard with 288-pin RDIMM form factor

Capacity and compatibility

This 288GB kit contains six 48GB DDR5 ECC Registered DIMMs rated at 5600MHz with CL46 latency and 1.1V operation. It is validated for the Supermicro H13DSG-OM motherboard and uses the 288-pin RDIMM form factor required by that platform.

Upgrade path and value

The kit replaces lower-capacity DDR5 RDIMM sets or mixed-rank configurations that limit total memory or force reduced speeds. The jump is worth it when your workloads need the full 288GB at the board's native 5600MHz without downclocking or population restrictions.

Pre-install checks

Verify your motherboard manual for approved DIMM population order and maximum supported capacity per slot. Confirm the system requires Registered ECC modules and that the BIOS is current enough to recognise 48GB 2Rx8 density at 5600MHz.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $7,578.99
Pricier than about 84% of the 21,161 comparable items (median $397.99).
Total capacity 288 GB (6 × 48 GB)
Higher than about 81% of the 20,941 comparable items (median 32 GB).
Price per GB $26.32 per GB
Pricier than about 72% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K6
Total capacity288 GB (6 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items288 GB 6 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will these 288-pin DDR5 RDIMMs fit the Supermicro H13DSG-OM motherboard?

Yes, the 288-pin DDR5 RDIMM form factor matches the slots on the Supermicro H13DSG-OM. The kit contains six 48 GB modules for a total of 288 GB.

What is the correct installation order for the six modules on this board?

Install the six RDIMMs following the population sequence shown in the Supermicro H13DSG-OM manual, filling the prescribed slots in the exact order to enable all memory channels.

Do the modules have a heat spreader, and will they need active cooling later?

The modules ship without a heat spreader. Standard server chassis airflow across the DIMM slots is sufficient; no extra cooling or maintenance is required.

More in Model-Specific Memory Upgrades

Similar items