We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1TB DDR5 5600 ECC RDIMM 16x64GB CL46 1.1V 2Rx4 288-pin Supermicro H13DSG-OM

SKU CH-R0T8-8NBQ7

1TB DDR5 5600 ECC RDIMM kit with 16 × 64 GB modules, CL46, 1.1 V, 2Rx4, 288-pin, verified for Supermicro H13DSG-OM

  • Total capacity1 TB (16 × 64 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 1TB 16X64GB

Show 30 more
  • 1TB kit (16 × 64 GB) for high-capacity server workloads
  • DDR5-5600 (PC5-44800) at CL46 for rated-speed operation
  • Registered ECC RDIMM with 2Rx4 rank for full-population stability
  • 10 V standard voltage for efficient power draw
  • 288-pin form factor matched to Supermicro H13DSG-OM motherboard

1TB DDR5-5600 ECC RDIMM kit for Supermicro H13DSG-OM

This 1TB kit contains sixteen 64GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.10V operation. Each module uses a 2Rx4 registered ECC design on a 288-pin form factor built with major OEM DRAM. It is engineered as an exact-match upgrade for the Supermicro H13DSG-OM motherboard where full population and registered signalling are required.

Registered ECC architecture for stable full-load

The registered buffer reduces electrical load on the memory controller so all sixteen slots can run at the rated 5600 speed without down-clocking. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during sustained workloads. Modules operate at the standard 1.10V DDR5 voltage and ship without heat spreaders, relying on server chassis airflow for cooling.

Replaces partial or slower memory sets

Install this kit when the board is running fewer than sixteen DIMMs, when installed modules are slower than 5600 MT/s, or when non-ECC UDIMMs are present and registered ECC is required. The upgrade is worth it only if the system manual confirms 1TB maximum capacity and the correct population sequence for sixteen 2Rx4 modules. Buyers who need a different capacity, a UDIMM form factor, or compatibility with another motherboard should not use this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $30,308.99
Pricier than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 1 TB (16 × 64 GB)
Higher than about 93% of the 20,941 comparable items (median 32 GB).
Price per GB $30.31 per GB
Pricier than about 87% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-924K16
Total capacity1 TB (16 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1 TB 16 × 64 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 16 DDR5 RDIMM modules in the Supermicro H13DSG-OM and which population step is often missed?

Follow the motherboard manual for the exact 16-slot population order; the step most often missed is installing modules in the prescribed sequence per CPU socket rather than filling slots sequentially.

What maintenance or replacement will this 1TB DDR5 ECC RDIMM kit need over its service life?

The modules have no moving parts and require no scheduled maintenance; replacement is only necessary if a DIMM fails, which is covered by the lifetime replacement warranty.

What is the first limit that appears when the 16x64GB kit runs sustained workloads at DDR5 5600?

The registered ECC architecture is designed to keep every slot stable at full 5600 MT/s and 1.1V, so the practical limit encountered first is the motherboard's maximum supported capacity and population rules.

More in Model-Specific Memory Upgrades

Similar items