We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 192GB 12x16GB DDR5 4800 ECC Registered RDIMM Supermicro H13SSH memory upgrade

SKU CH-7S4W-1F4H6

A 192 GB DDR5 4800 ECC registered RDIMM kit of twelve 16 GB modules at 1.1 V CL40, validated for the Supermicro H13SSH motherboard

  • Total capacity192 GB (12 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 192 GB exact-match kit for Supermicro H13SSH
  • 12 registered ECC modules run fully populated at rated speed
  • DDR5 4800 CL40 at 1.1 V matches controller spec
  • 1Rx8 registered design offloads memory controller for stability
  • ECC corrects single-bit errors preventing silent data corruption

192GB DDR5 ECC RDIMM kit for Supermicro H13SSH

This 192GB kit delivers twelve 16GB DDR5 4800 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SSH motherboard expects. It targets administrators who need the full 192GB capacity recognised at rated speed without manual tuning.

Registered ECC stability at full population

Registered buffering offloads the memory controller so all twelve slots run fully populated at 4800 MT/s, while ECC corrects single-bit errors on the fly to prevent silent data corruption. The 1Rx8 organisation and 1.1V operation match the board's population rules, so headroom ends when the platform's maximum supported capacity is reached.

288-pin DDR5 RDIMM form factor

The modules use the 288-pin DDR5 RDIMM form factor required by the H13SSH; they are not compatible with UDIMM or SODIMM slots. Verify your system manual for approved DIMM population order and maximum capacity before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $4,989.99
Pricier than about 80% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (12 × 16 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $25.99 per GB
Pricier than about 71% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-618K12
Total capacity192 GB (12 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 12 × 16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will this 12-module DDR5 4800 kit run at rated speed alongside any existing RDIMMs I keep in my Supermicro H13SSH?

The kit is an exact-match upgrade for the H13SSH; populate all 12 slots with these 1Rx8 Registered ECC modules at 1.1 V CL40 and the memory controller will recognise the full 192 GB at DDR5 4800 without down-clocking.

How can I verify the kit is operating at DDR5 4800 CL40 with ECC active after installation?

Check the BIOS memory information screen — it should show 192 GB total, DDR5 4800 MT/s, CL40 timings, 1.1 V, and ECC Registered status for each of the 12 DIMMs.

What exactly ships in the box and is anything else required to install it?

The package contains the 12 x 16 GB DDR5 4800 288-pin ECC Registered RDIMMs only; no heat spreaders, cables or tools are included and none are required for standard server DIMM slots.

More in Model-Specific Memory Upgrades

Similar items