We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 1.1V 2Rx8 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-VPPN-PCYN5

A 192 GB DDR5 kit of four 48 GB registered ECC RDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for Supermicro H14DST-F servers

  • Total capacity192 GB (4 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 4X48GB

Show 30 more
  • 192GB total capacity from four 48GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matches controller timing for rated performance
  • 1V operation and 2Rx8 registered ECC architecture offloads the memory controller
  • 288-pin RDIMM form factor verified for Supermicro H14DST-F motherboard fitment
  • Major OEM Samsung Micron Hynix chips provide enterprise-grade reliability and error correction

Server memory kit for Supermicro H14DST-F

This 192 GB kit contains four 48 GB DDR5 RDIMMs built for the Supermicro H14DST-F motherboard. Registered ECC modules provide the error correction and signal buffering that multi-socket servers require for continuous operation. The kit delivers the exact rank structure and voltage the platform expects.

Registered ECC with 2Rx8 organisation

Each module uses a 2Rx8 layout at 1.1 V with CL46 latency and runs at DDR5 5600 (PC5-44800). Registered buffering reduces electrical load on the memory controller so all slots can be populated at rated speed. ECC corrects single-bit errors before they affect data integrity.

Four-slot population at full capacity

The 288-pin RDIMM form factor matches the board's DIMM sockets; UDIMM or SODIMM modules will not fit. Populating all four channels with this kit enables the maximum supported throughput for the platform. Verify the motherboard manual for approved population order before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $4,955.99
Pricier than about 80% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (4 × 48 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $25.81 per GB
Pricier than about 71% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K4
Total capacity192 GB (4 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 4 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What does the 5600 speed rating mean once the modules are installed in a Supermicro H14DST-F?

The kit runs at DDR5-5600 (PC5-44800) with CL46 latency when the board's memory controller is populated according to its validated population rules.

How does the 288-pin RDIMM interface limit what I can install alongside this kit?

The 288-pin Registered DIMM form factor is required by the H14DST-F; UDIMMs or SODIMMs will not fit or function in these slots.

What physical clearance do the 48GB modules need inside the server chassis?

Each 48GB module is a standard-height 288-pin RDIMM without a heat spreader, so it fits the H14DST-F's DIMM slots without extra vertical clearance.

More in Model-Specific Memory Upgrades

Similar items