We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, 288-pin, no heat spreader

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 4800 CL40 ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-3Z48-BP3RT

A 192GB kit of two 96GB DDR5 4800 CL40 ECC registered DIMMs validated for the Supermicro H13DSH motherboard

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

Show 30 more
  • 192 GB total capacity from two 96 GB modules
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the memory controller specification
  • 288-pin RDIMM form factor fits the Supermicro H13DSH motherboard

Exact-match 192 GB kit for Supermicro H13DSH

This 192 GB kit delivers two 96 GB DDR5 4800 RDIMMs built to the precise rank, voltage, and timing the H13DSH memory controller expects so the server recognises full capacity at rated speed. It targets administrators upgrading that specific motherboard without guesswork.

Registered ECC architecture for full-slot stability

Registered buffering offloads the memory controller letting every slot run fully populated at 4800 MT/s while on-die ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots in production workloads.

288-pin RDIMM form factor with no heat spreader

The modules use the 288-pin Registered DIMM layout this board requires not UDIMM or SODIMM and omit a heat spreader to fit tight server chassis clearances; always verify your manual for supported capacities and population order before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,337.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $27.80 per GB
Pricier than about 78% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 2 × 96 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 96GB DDR5 RDIMM modules need any firmware updates or reconfiguration after installation?

The kit is an exact-match upgrade for the Supermicro H13DSH, matching the board's required 2Rx4 rank, 1.1V voltage, and CL40 timing so the memory controller recognises full capacity at rated speed without extra steps.

What limits sustained throughput on the 4800 MT/s DDR5 RDIMM kit when all slots are populated?

Registered ECC architecture offloads the memory controller, allowing every slot to run fully populated at the rated 4800 MT/s without down-clocking, so the first limit is the platform's maximum supported memory bandwidth.

How much extra heat or power does the 1.1V DDR5 ECC RDIMM kit add when the server runs 24/7?

Operating at 1.1V with no heat spreader, the modules draw minimal power and rely on the chassis airflow designed for the Supermicro H13DSH, keeping thermal contribution low during continuous operation.

More in Model-Specific Memory Upgrades

Similar items