We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1TB DDR5 5600 CL46 16x64GB RDIMM ECC Registered memory upgrade for Supermicro H14DSG-OD

SKU CH-DY3P-SATGT

A 1 TB DDR5 kit of sixteen 64 GB registered ECC RDIMMs running at 5600 MHz CL46 1.1 V for the Supermicro H14DSG-OD motherboard

  • Total capacity1 TB (16 × 64 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 1TB 16X64GB

Show 30 more
  • 1TB capacity with 16 matched 64GB modules for full server population
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises every slot
  • 1V operation at 2Rx4 rank matches controller requirements exactly
  • Verified fitment for Supermicro H14DSG-OD motherboard with 288-pin RDIMM form factor

1TB DDR5-5600 Registered ECC Kit

This 1TB kit contains sixteen 64GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.1V operation. It is built for the Supermicro H14DSG-OD motherboard and targets administrators who need maximum registered ECC capacity in every available slot.

Registered 288-pin RDIMM form factor

Each module uses a 288-pin registered DDR5 RDIMM design with a 2Rx4 organisation and no heat spreader. The registered architecture buffers address and command signals so the memory controller can drive a fully populated configuration at the rated speed, while on-die ECC corrects single-bit errors before they affect workloads.

Verify DIMM population rules before ordering

Server memory support varies by model and BIOS revision. Consult the Supermicro H14DSG-OD manual for the approved population sequence, maximum capacity per channel, and any firmware requirements so the kit is recognised at full capacity on first boot.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $33,082.99
Pricier than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 1 TB (16 × 64 GB)
Higher than about 93% of the 20,941 comparable items (median 32 GB).
Price per GB $33.08 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-924K16
Total capacity1 TB (16 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items1 TB 16 × 64 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What does DDR5 5600 PC5-44800 mean for real-world bandwidth?

The kit runs at 5600 MT/s, delivering up to 44800 MB/s per module; the memory controller on the Supermicro H14DSG-OD will operate all 16 slots at this rate when populated per the board's population rules.

What physical slot and clearance does this 288-pin RDIMM kit require?

Each 64 GB module uses a standard 288-pin DDR5 RDIMM edge connector and has no heat spreader, so it fits any DDR5 RDIMM slot on the H14DSG-OD without extra height clearance.

How do I install the 16 modules in the correct population order?

Consult the H14DSG-OD manual for the exact DIMM sequence; the common mistake is filling slots sequentially instead of following the board's prescribed population order for 16 DIMMs.

More in Model-Specific Memory Upgrades

Similar items