We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR5 RDIMM circuit board with gold contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SSH memory upgrade

SKU CH-E6VM-P0B56

96GB DDR5 4800 ECC registered RDIMM built for the Supermicro H13SSH motherboard

  • Total capacity96 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 30 more
  • 96 GB capacity lets you fully populate Supermicro H13SSH slots
  • DDR5 4800 speed with CL40 latency matches the board's rated timing
  • 2Rx4 registered ECC architecture offloads the memory controller for stable full-population operation
  • 1 V DDR5 voltage aligns with the server's memory-controller requirements
  • 288-pin RDIMM form factor fits the H13SSH motherboard exactly

Exact-Match 96GB DDR5-4800 RDIMM

This 96GB DDR5 4800 module is built for the Supermicro H13SSH motherboard. Registered ECC architecture with 2Rx4 organisation and CL40 timing matches the board's memory controller expectations. It installs as a direct upgrade without configuration changes.

288-Pin Registered Build

The 288-pin RDIMM form factor fits only Registered DIMM slots, not UDIMM or SODIMM sockets. Registered buffering offloads the memory controller so every populated slot runs at full rated capacity. ECC corrects single-bit errors on the fly to prevent silent data corruption.

DDR5 4800 Interface Limits

DDR5 4800 (PC5-38400) sets the maximum transfer rate this module can deliver. Population rules in the system manual dictate how many DIMMs can run at this speed simultaneously. Exceeding the approved slot count or mixing ranks will reduce operating frequency.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,527.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $26.33 per GB
Pricier than about 72% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does this DDR5-4800 RDIMM run at its rated 4800 MT/s on the Supermicro H13SSH, or is it capped by the platform?

The module is specified at DDR5 4800 (PC5-38400) with CL40 at 1.1 V. The H13SSH memory controller determines the final operating speed; this kit matches the board's rated DDR5-4800 profile so it will run at that speed when populated per the manual.

Will the 288-pin registered DIMM fit the H13SSH DIMM slots without clearance issues from CPU coolers or chassis walls?

The kit uses the standard 288-pin RDIMM form factor the H13SSH requires. It has no heat spreader, keeping the module at the JEDEC reference height, which minimises interference with most server CPU coolers and 1 U chassis lids.

What is the correct population order for a single 96 GB 2Rx4 RDIMM on the H13SSH, and which step do installers most often miss?

Consult the H13SSH manual for the exact slot sequence — typically the first slot of each memory channel. The step most often missed is fully seating the module until both ejector clips click, ensuring the registered buffer and ECC initialise correctly.

More in Model-Specific Memory Upgrades

Similar items