We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare DDR5 RDIMM circuit board with gold contacts and black memory chips

NEMIX RAM

NEMIX RAM 96GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H14SSL-N memory upgrade

SKU CH-HPTR-VHEH8

96GB DDR5 4800 CL40 2Rx4 ECC registered RDIMM validated for the Supermicro H14SSL-N motherboard

  • Total capacity96 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 24 more
  • 96GB capacity lets you populate every slot on the Supermicro H14SSL-N
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • DDR5-4800 speed with CL40 latency matches the board's rated memory controller specs
  • 1V operation at 2Rx4 rank aligns with the motherboard's voltage and population rules
  • 288-pin RDIMM form factor fits the exact DIMM slots this server requires

96GB DDR5 4800 ECC RDIMM for Supermicro H14SSL-N

This 96GB DDR5 4800 (PC5-38400) registered ECC module is built as an exact-match upgrade for the Supermicro H14SSL-N motherboard. It delivers 2Rx4 organisation, CL40 latency and 1.1V operation in the 288-pin RDIMM form factor the board requires. The kit targets administrators who need full-capacity, error-correcting memory that the system recognises at its rated speed without manual tuning. Buyers using consumer UDIMMs or SODIMMs will find those form factors incompatible with this server platform.

Sustained-load behaviour

Registered buffering offloads the memory controller so every populated slot runs at the full 96GB capacity and 4800 MT/s data rate during continuous workloads. ECC circuitry detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots that can interrupt production services. The module uses major OEM Samsung, Micron or Hynix DRAM chips and operates without a heat spreader at the standard 1.10V. Systems lacking registered DIMM support or ECC capability cannot use this memory.

Verify motherboard manual for population rules

Server and motherboard memory support varies by model, so consult the Supermicro H14SSL-N manual for approved DIMM population order, maximum supported capacity per slot and installation steps. The board requires 288-pin registered RDIMMs; UDIMM or SODIMM modules will not fit or function. Confirm that your BIOS revision supports the 96GB 2Rx4 configuration at DDR5 4800. Buyers needing different capacities, ranks or form factors must select a module matching their specific platform requirements.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,497.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $26.02 per GB
Pricier than about 71% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power does this 96GB DDR5-4800 1.10V registered kit draw when the server runs continuously?

Each module operates at 1.10V, the standard DDR5 voltage for registered DIMMs; total system draw depends on how many slots the Supermicro H14SSL-N motherboard populates.

What motherboard slot and memory type must my Supermicro H14SSL-N already provide for this 288-pin RDIMM kit to be recognised?

The board needs DDR5 288-pin registered DIMM slots; the kit is validated for the H14SSL-N and will not fit UDIMM or SODIMM sockets.

Can I mix this 2Rx4 CL40 registered kit with other DDR5 RDIMMs of different rank or speed already installed in the H14SSL-N?

Mixing ranks or speeds is possible only if the motherboard manual approves the specific population order; otherwise the system may downclock or fail to boot.

More in Model-Specific Memory Upgrades

Similar items