We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 96GB (2×48GB) DDR5 5600 CL46 1.1V ECC RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-VQEZ-XQ5HR

96GB DDR5 5600 ECC RDIMM kit (2×48GB) validated for Supermicro H13SSL-N servers

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB 2X48GB

Show 24 more
  • 96 GB total capacity from two 48 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSL-N
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors automatically
  • 1 V operation at 1.10 V specified voltage reduces power draw per module
  • 288-pin RDIMM form factor matches the board's required slot type exactly

Exact-match DDR5 upgrade for Supermicro H13SSL-N

This 96GB kit delivers two 48GB DDR5 5600 registered ECC modules built to the board's precise rank, voltage and timing requirements. The 2Rx8 organisation and 1.1V operation let the memory controller recognise full capacity and run at rated speed without manual tuning.

Suited for servers needing maximum registered ECC

Administrators populating every slot on an H13SSL-N gain the stability of buffered architecture and on-the-fly single-bit error correction. Builders using consumer UDIMMs, non-ECC modules or a different DDR generation will find the modules physically or electrically incompatible.

Sustained load behaviour with registered ECC

Registered buffering reduces electrical load on the controller so all slots remain stable at 5600 MT/s during continuous throughput workloads. ECC correction prevents silent data corruption from accumulating over long runtimes, avoiding the unplanned reboots that unbuffered memory can allow.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,512.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $26.18 per GB
Pricier than about 72% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 2 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does this 288-pin DDR5 RDIMM kit require a Supermicro H13SSL-N motherboard to operate?

Yes, the 96GB kit is validated for the Supermicro H13SSL-N motherboard and will only function in systems that accept 288-pin registered DDR5 ECC modules at 1.1V.

Can I mix these 2Rx8 CL46 modules with existing DDR5 RDIMMs of a different rank or speed on the same board?

Mixing different ranks or speeds is not recommended; the memory controller will downclock all slots to the slowest module and may limit total capacity or stability.

How do I confirm the kit is running at DDR5 5600 CL46 with ECC active after installation?

Enter the BIOS or use a tool like dmidecode to verify the reported speed shows 5600 MT/s, CAS latency 46, and ECC status enabled for each 48GB DIMM.

More in Model-Specific Memory Upgrades

Similar items