We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 2TB (16x128GB) CL46 2Rx4 1.1V 288-pin ECC RDIMM Kit for Supermicro H14DST-F

SKU CH-Y8GZ-ER8GX

A 2 TB DDR5 registered ECC kit with sixteen 128 GB modules running at 5600 MHz, CL46, 1.1 V for the Supermicro H14DST-F

  • Total capacity2 TB (16 × 128 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 2TB 16X128GB

Show 30 more
  • 2TB capacity with 16 matched 128GB modules for maximum server density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC design with 2Rx4 organisation corrects single-bit errors and offloads the memory controller
  • 10V operation at CL46 latency matches the motherboard's native timing profile
  • 288-pin RDIMM form factor validated for Supermicro H14DST-F memory population rules

2TB DDR5 ECC RDIMM kit for Supermicro H14DST-F

This 2TB kit contains 16 registered DDR5 DIMMs, each 128GB, built for the Supermicro H14DST-F motherboard. It runs at DDR5-5600 with CL46 latency at 1.10V. The 2Rx4 organisation and registered buffer let the board run every slot populated at rated speed. Target users operate memory-intensive servers that require error-correcting capacity at scale.

Verify DIMM population rules before ordering

Consult the H14DST-F manual for supported capacities per channel and the approved installation sequence. The board requires 288-pin registered RDIMMs; unbuffered UDIMMs or SODIMMs will not fit or function. Confirm the BIOS revision supports the full 16-module configuration at DDR5-5600. Buyers who need a different capacity or a non-registered form factor cannot use this kit.

Registered ECC modules without heat spreaders

Each DIMM uses major OEM Samsung, Micron or Hynix chips in a bare PCB design. The registered architecture reduces electrical load on the memory controller when all 16 slots are filled. ECC corrects single-bit errors in flight, preventing silent data corruption. The 1.10V operating voltage matches the DDR5 baseline for server platforms.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $67,858.99
Pricier than about 99% of the 21,161 comparable items (median $397.99).
Total capacity 2 TB (16 × 128 GB)
Higher than about 99% of the 20,941 comparable items (median 32 GB).
Price per GB $33.93 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-724K16
Total capacity2 TB (16 × 128 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items2 TB 16 × 128 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 2TB kit include all 16 DDR5 5600 RDIMM modules or must any be purchased separately?

The kit ships as a complete 2TB package containing 16 modules of 128GB each, so nothing else is required for a full installation.

Why is the kit specified as 2Rx4 CL46 rather than a different rank or latency?

The 2Rx4 organisation and CL46 timing match the Supermicro H14DST-F memory controller requirements, ensuring the board recognises the full 2TB capacity at the rated DDR5 5600 speed.

What does the DDR5 5600 (PC5-44800) rating deliver once the modules are installed in the H14DST-F?

The server will run the memory at 5600 MT/s with a 1.10 V supply, providing the rated bandwidth and registered ECC stability across all 16 slots.

More in Model-Specific Memory Upgrades

Similar items