We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
15 inch multi-colour cable with ATX 4-pin male and Molex LP4 male connectors

Nippon Labs

Nippon Labs POW-08315 15" ATX 4pin Male to Molex LP4 Male internal power cable

SKU CH-0G52-9H7HR MPN POW-08315

15-inch cable adapts an ATX 4-pin male connector to a Molex LP4 male connector for internal power routing

  • Cable length1.25 ft (0.38 m)
  • First connector1x ATX 4pin male
  • Second connector1x Molex LP4 male
  • Connector count2
  • Connector genderFemale to Male
  • Product colorMulti-Color
  • Connects ATX 4-pin power to Molex LP4 devices
  • 15-inch length gives flexible routing inside the case
  • Multi-colour wires simplify identification during installation
  • Two connectors link PSU and peripheral directly
  • New condition ensures reliable factory-quality performance

Purpose and audience

This 15-inch internal power cable converts an ATX 4-pin male connector to a Molex LP4 male connector, letting builders link a standard motherboard power header to legacy drives or accessories. It suits system integrators and hobbyists who need a short, direct adapter rather than a full harness replacement.

Capacity and headroom

The 1.25 ft length provides enough slack to route the cable behind a motherboard tray or between drive bays without excess coil. It handles the 12 V rail carried by the ATX 4-pin source, but the single Molex output limits the assembly to one peripheral, so multi-device chains require additional splitters.

Build integration

The two-connector design plugs straight into an existing ATX 4-pin header and a Molex-equipped device, needing no tools or extra wiring. Its compact footprint frees up space in tight chassis corners while the multi-colour wires aid quick identification during assembly or troubleshooting.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 94% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model namePOW-08315
Product colorMulti-Color
Ports & slots
First connector1x ATX 4pin male
Second connector1x Molex LP4 male
Connector count2
Connector genderFemale to Male
Size & build
Overall length15 in (38.1 cm)
Cable length1.25 ft (0.38 m)
Shipping weight0.02 kg
Package size135 × 127 × 23 mm

Questions about this item

Will this 15" ATX 4-pin male to Molex LP4 male cable reach my older motherboard connector without tension?

The cable is 15 inches long, giving you 1.25 feet of slack between the power supply and the motherboard.

How can I verify the cable is delivering power correctly after I connect it?

The system should boot normally and the motherboard power LED, if present, will light up once the 4-pin ATX connector is seated.

Does the package include any extra adapters or only the single cable shown?

The box contains one 15-inch cable with a 4-pin ATX male connector on one end and a Molex LP4 male connector on the other.

More in Internal PSU & Riser Cables

Similar items