We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SATA cable, one metre, right-angle connectors both ends

Nippon Labs

Nippon Labs SATA-1RR SATA cable 1m 3.28 ft right angle 2 connectors red SATA II 26 AWG

SKU CH-NZGT-AQJPP MPN SATA-1RR

A 1 metre red SATA II cable with two right-angle connectors supports 3.0 Gbps transfer rates and hot-swap capability

  • Cable length3.28 ft (1m)
  • Connector count2
  • Product typeSATA II
  • Product colorRed
  • Overall length1M (3.28 ft)
  • Key features1 Meter (3.28 ft) 2 shielded 26 AWG SATA II cable- 2 right a

Style Single Pack

  • Supports 3.0 Gbps transfer rates for fast data access
  • Dual right-angle connectors simplify tight-space installations
  • Shielded 26 AWG construction reduces signal interference
  • Narrow cable design improves internal airflow
  • Red colour aids quick cable identification

One-metre SATA II cable

This red 1-metre cable carries two shielded 26 AWG conductors and supports SATA I and SATA II devices at up to 3.0 Gbps. Both ends use right-angle 7-pin plugs so the cable hugs the motherboard and drive without protruding. The narrow profile eases routing and leaves more room for airflow inside the case. It is a new component ready for immediate installation.

Fits tight drive bays

The right-angle plugs let you connect drives that sit flush against a case wall or sit behind long graphics cards where straight connectors would not clear. Shielded 26 AWG wiring resists interference from nearby power cables. Hot-swap capability means you can attach or remove a drive without powering down the system, useful for test benches or removable drive trays. No extra adapters or brackets are required.

Replaces bulky ribbon-style SATA leads in older

Builders replacing wide parallel ATA ribbons or stiff first-generation SATA cables gain cleaner cable management and better cooling paths. The jump is worth it when the current cable blocks a fan, kinks sharply at the connector or lacks the 3.0 Gbps rating needed for a SATA II SSD or hard drive. It does not serve SATA III 6 Gbps devices at their full speed, so newer 6 Gbps drives should use a cable rated for that standard.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 85% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model nameSATA-1RR
Product typeSATA II
Product colorRed
Ports & slots
Connector count2
Size & build
Overall length1M (3.28 ft)
Cable length3.28 ft (1m)
Shipping weight0.04 kg
Package size114 × 81 × 19 mm

Other versions of this model

3 more in the same range

Questions about this item

What is the maximum data transfer rate this SATA II cable supports?

The cable supports data transfer rates of up to 3.0 Gbps for SATA II devices.

How much heat or noise does the cable generate during continuous operation?

As a passive shielded cable it produces no noise and negligible heat during all-day use.

Which devices must I already have to use this cable?

You need a SATA controller or motherboard with a 7-pin port and a SATA I or SATA II drive.

More in SATA & eSATA Drive Cables

Similar items