We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten red SATA cables one metre long with right-angle connectors

Nippon Labs

Nippon Labs SATA-1RR-10P SATA cable 1 m right angle 10 pack

SKU CH-KM1H-WQEG3 MPN SATA-1RR-10P

Ten 1-metre SATA II cables with dual right-angle connectors, shielded 26 AWG wiring and 3.0 Gbps transfer support

  • Cable length3.28 ft (1m)
  • Connector count2
  • Product typeSATA II
  • Product colorRed
  • Overall length1M (3.28 ft)
  • Key features1 Meter (3.28 ft) 2 shielded 26 AWG SATA II cable- 2 right a

Style 10 Packs

  • Right-angle connectors simplify tight build routing
  • Shielded 26 AWG wires support 3.0 Gbps data rates
  • Hot-swap capable for drive changes without shutdown
  • Narrow red cables improve airflow inside the case
  • Ten cables in one pack cover multiple drives

10-pack right-angle SATA cables

This 10-pack supplies ten red SATA cables each measuring 1 m (3.28 ft.) with right-angle 7-pin connectors on both ends. The shielded 26 AWG conductors support SATA II operation up to 3.0 Gbps and hot-swap capability. Builders wiring multiple drives in a single chassis can use the bundle to keep routing consistent across all bays.

Replaces loose or straight-connector cables

The right-angle plugs fit tight drive bays where straight connectors press against side panels or adjacent cards. The narrow cable profile reduces clutter and improves airflow compared with older ribbon-style leads. The upgrade is worth it when a straight connector blocks a neighbouring slot or when cable bulk restricts cooling in a densely populated case.

Check connector orientation and controller speed

Verify that each target drive and motherboard port accepts a right-angle plug without mechanical interference. Confirm the host controller operates at SATA II 3.0 Gbps so the cable’s rated speed is fully utilised. Ensure the 1 m length reaches from the controller to the furthest drive bay without strain.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $22.99
Pricier than about 80% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model nameSATA-1RR-10P
Product typeSATA II
Product colorRed
Ports & slots
Connector count2
Size & build
Overall length1M (3.28 ft)
Cable length3.28 ft (1m)
Shipping weight0.45 kg
Package size254 × 152 × 76 mm

Other versions of this model

3 more in the same range

Questions about this item

Will the 1 m right-angle SATA cables with 7-pin connectors fit a standard 2.5-inch drive in a tight chassis?

The 1 m length and right-angle 7-pin connectors allow routing close to the drive and motherboard, while the narrow 26 AWG cable improves airflow in compact cases.

Do I need to align a key or latch when plugging the right-angle SATA connectors?

Insert each 7-pin connector straight into the SATA port until the metal latch clicks; forcing it at an angle can bend the pins.

When should I replace these SATA II cables if transfer speeds drop?

Replace the cables if sustained throughput falls well below the 3.0 Gbps rating or if the latch no longer holds the connector securely.

More in SATA & eSATA Drive Cables

Similar items