We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ruth's sister

Ruth's sister 8-pin to dual 6+2-pin PCIe power splitter cable 22 cm

SKU CH-XHQM-Y1HSH

Splits one 8-pin PCIe connector into two 6+2-pin plugs using 18 AWG tinned-copper wire, 22 cm long

  • Splits one 8-pin into two 6+2-pin connectors
  • 22 cm length keeps cable runs tidy
  • 18 AWG tinned copper handles high current loads
  • 5559 and 5557 interfaces ensure secure seating
  • PVC insulation rated to 80 °C for safe operation

Product identity

This is a new 22 cm internal power splitter cable from Ruth's sister. It converts a single 8-pin PCIe source into two 6+2-pin connectors for graphics cards or mining rigs. Builders with limited PSU outputs use it to add a second GPU power line without replacing the power supply.

Critical specification

The cable uses 18 AWG tinned copper conductors rated for 80 °C with PVC insulation. Each 6+2-pin end mates with 5557 slide-rail headers while the source end fits a 5559 8-pin socket. This wire gauge and connector pairing determines whether the assembly can deliver the current your card demands.

Capacity and headroom

The 22 cm length and 32 g weight suit tight routing inside compact cases. Two 6+2-pin branches cover most dual-connector GPUs, but cards requiring three or more PCIe plugs will still need additional cables or a higher-output PSU.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 91% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How much power can each 6+2-pin connector deliver when the cable is running from a single 8-pin supply output?

The cable uses 18 AWG tinned-copper conductors rated for 80 °C, which are the same gauge used on standard PCIe power leads, so each 6+2-pin end carries whatever the PSU’s 8-pin rail is rated for.

What connectors are on each end of the splitter?

One end has a 5559 8-pin plug that goes into the power supply, and the other end splits into two 5557 6+2-pin slide-rail plugs that can be used as either 6-pin or 8-pin.

Will the 22 cm length reach from my PSU to a graphics card in a mid-tower case?

At 22 cm the cable is designed for tight routing; measure the distance from your PSU’s 8-pin socket to the GPU’s power inputs to confirm it spans the gap without strain.

More in Internal PSU & Riser Cables

Similar items