STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Combines eSATA data with 12V and 5V power via USB to run 2.5 and 3.5 SATA drives from a Power eSATA port without a separate adapter
This 0.5m Power eSATA to SATA 22pin cable connects an external Power eSATA port directly to an internal 2.5 or 3.5inch SATA hard drive or SSD. It combines data transmission with 12V and 5V power delivery in a single cord, removing the need for a separate power adapter. The design suits external disk enclosures, DIY storage projects and industrial equipment where a short, tidy link is preferred.
Built-in shielded wiring reduces electromagnetic interference to maintain consistent data transfer during sustained read and write operations. The integrated Power eSATA input feeds both voltage rails simultaneously, so the drive receives stable power without voltage drops that can interrupt long copy sessions. Performance remains reliable as long as the host port supplies adequate current for the attached drive.
The cable operates passively with no active cooling components, producing zero noise and adding negligible heat to the system. Power draw is limited to what the host Power eSATA port provides, keeping overall consumption low. The flexible 0.5m length allows neat routing inside enclosures without obstructing airflow around the drive or other components.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The Power eSATA plug supplies both 12V and 5V rails directly from the host port, so the cable draws whatever current the attached 3.5-inch SATA drive requires; the host must be able to deliver enough amperage or the drive may not spin up.
The host side needs a Power eSATA port that combines standard eSATA data with USB power pins; a plain eSATA or USB-only port will not provide the required 12V and 5V supply.
Yes, the 22-pin connector matches the unified data-and-power layout on both 2.5-inch and 3.5-inch SATA drives, so your existing SSD plugs in directly.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?