We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
50cm Oculink 4i SFF8611 to U.2 SFF8639 NVMe adapter cable with 15Pin SATA power

SMUGDESK

SMUGDESK CAB861139 50cm Oculink 4i SFF8611 to U.2 SFF8639 NVMe Adapter 38Pin 68Pin 15Pin SATA Power

SKU CH-CHZN-X6VNH MPN CAB861139

Connects Oculink 4i SFF8611 to U.2 SFF8639 NVMe SSDs with integrated 15-pin SATA power

  • PCIe 4.0 speed with 38-pin Oculink to 68-pin U.2 conversion
  • 15-pin SATA power connector powers NVMe drives without extra cables
  • 50 cm length enables tidy internal routing in servers and NAS
  • Shielded wiring maintains stable high-bandwidth signal transmission
  • Works with enterprise U.2 and U.3 NVMe SSDs and RAID controllers

Oculink 4i to U.2 NVMe adapter

The SMUGDESK CAB861139 converts an Oculink 4i SFF8611 host port to a U.2/U.3 SFF8639 NVMe drive interface. A 15-pin SATA power connector supplies the drive directly from the system power supply. The 50-centimetre shielded cable supports PCIe 4.0 bandwidth for enterprise SSD installations. It targets administrators adding high-performance storage to servers, NAS units or workstations.

Compatibility checks before ordering

Verify that your host provides an Oculink 4i SFF8611 connector with 38 pins and that the target drive uses a U.2 or U.3 SFF8639 interface with 68 pins. Confirm the system can deliver adequate power through a standard SATA power cable to the 15-pin connector on the adapter. Ensure the 50-centimetre length suits your chassis routing without tension or sharp bends.

What the bundled power connector changes

The integrated 15-pin SATA power plug removes the need for a separate drive power cable, reducing cable count inside dense enclosures. Shielded wiring on the data path helps maintain signal integrity at PCIe 4.0 speeds over the full cable run. This single-assembly design simplifies installation in hot-swap backplanes or fixed-mount drive trays where space is limited.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $22.99
Typical for this category: the median of 1,721 items is $22.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What connectors come on the CAB861139 cable and do I need any extra power leads?

The cable has a 38‑pin Oculink 4i SFF8611 plug on one end, a 68‑pin U.2/U.3 SFF8639 connector on the other, and a 15‑pin SATA power tail that feeds the NVMe SSD directly — no separate power cable is required.

How do I decide between the available lengths or versions of this adapter?

This model is offered only in a 50 centimetre length with PCIe 4.0 signalling, so there is no alternative length or version to choose from.

What does the PCIe 4.0 rating mean when the cable is installed in a server or NAS?

It indicates the link can run at PCIe 4.0 speeds between the Oculink 4i port and the U.2/U.3 NVMe drive, provided both the host controller and the SSD also support PCIe 4.0.

More in SATA, IDE & M.2 Drive Adapters

Similar items