STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Round SATA III cable with latching connectors supports 6 Gbps data transfer and measures 60 cm for tidy internal routing
This 24 inch round SATA cable connects a SATA hard drive or SSD to a motherboard or controller. It is intended for system builders and upgraders who need a reliable internal data link. The black cable measures 600 mm and carries two latching connectors.
Straight latching receptacles on both ends lock into place to prevent accidental disconnection during transport or vibration. The round jacket reduces bulk compared with flat ribbon cables, helping airflow inside a desktop or server chassis. Both connectors are 7 pin data types only.
Use this cord when an existing cable is damaged, too short for a new drive layout, or lacks a locking mechanism. The jump is worth it when the current link drops to lower speeds or disconnects under load. It supports up to 6 Gbps with SATA 3.0 compliant drives and meets SATA 6Gb/s specifications.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | StarTech.com |
| Model name | SATRD60CM |
| Product type | SATA III |
| Product color | Black |
| Performance | |
| Rated speed | SATA III (6 Gbit/s) |
| Ports & slots | |
| Connector count | 2 |
| Connector details | Connector A: 1 x SATA (7 pin, Data) Latching Receptacle Connector B: 1 x SATA (7 pin, Data) Latching Receptacle |
| Size & build | |
| Overall length | 23.6 in [600 mm] |
| Cable length | 1.97 ft (0.6 m) |
| Shipping weight | 0.05 kg |
| Package size | 215 × 125 × 90 mm |
It supports up to 6 Gbps when connected to SATA 3.0 compliant drives, and the cable itself is fully compliant with the SATA 6 Gb/s specification.
The straight 7-pin latching receptacles sit flush against the drive and motherboard ports, so allow enough depth for the connector body plus the cable bend radius behind it.
Push each connector straight in until the metal latch clicks into the port notch; to remove, press the latch tab down while pulling the connector straight out.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?