ASRock Rack ROMED8-2T/BCM server motherboard SP3 LGA 4094 8 DDR4 3200 10GbE
- EPYC
- Supports AMD EPYC 7…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Single-socket LGA 1700 mATX board with DDR5-4400 ECC support, PCIe 5.0 x16, eight SATA ports and four gigabit LAN
The Supermicro MBD-X13SCH-LN4F-O is a Micro ATX board that accepts one LGA 1700 processor from the Intel Xeon 6300-series, E-2400 or Pentium lines with a thermal design power up to 95 W. It provides four DDR5 288-pin slots supporting ECC unbuffered memory at 4400 MT/s up to 128 GB total capacity.
This board fits builders who want up to eight SATA3 drives via Slimline SAS, two M.2 2280/22110 slots and four gigabit Ethernet links in a 9.6-inch square form factor. It is not suited for dual-processor configurations, for workloads requiring more than one x16 slot, or for systems that need 10 GbE networking.
The single PCIe 5.0 x16 slot is the only full-width expansion lane; two additional PCIe 4.0 x4 lanes are routed through x8 physical slots. Choose this motherboard when the primary add-in card requires a Gen 5 x16 connection and secondary cards can operate at x4 speeds.
Measured against everything we stock in Server & Workstation Boards, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | SUPERMICRO |
| Model name | MBD-X13SCH-LN4F-O |
| Processor | |
| Processor | Intel Xeon 6300-series/ E-2400/Pretium Processor |
| CPU socket | LGA 1700 |
| Supported CPU count | 1 |
| Processor details | Up to 95 W TDP |
| Chipset | Intel C266 |
| Memory | |
| RAM slots | 4 x DDR5 288-pin |
| Supported memory | DDR5 4400 |
| Max supported RAM | 128 GB |
| ECC support | Yes |
| Storage | |
| SATA ports | 8 SATA3 (6 Gbit/s) port(s) via Slimline SAS x8 connector |
| SATA and RAID support | 0/1/5/10 |
| M.2 slots | Interface: 2 PCIe 4.0 x4 Form Factor: 2280/22110 Key: M-Key |
| Graphics | |
| Onboard video chip | Aspeed AST2600 |
| Connectivity | |
| Network speed | 10/100/1000 Mbit/s |
| Ethernet controller | Intel I210 |
| Maximum network speed | 4 × 1 Gbit/s |
| Ports & slots | |
| PCIe 5.0 x16 slots | 1 x PCIe 5.0 x16 |
| PCIe x4 slots | 2 x PCIe 4.0 x4 (in x8 slot) |
| Rear panel ports | 1 x COM (Serial Port) / 1 x D-Sub / 2 x USB 2.0/1.1 / 3 x USB 3.2 Gen 1 / 4 x LAN (RJ45) |
| Size & build | |
| Form factor | Micro ATX |
| Width and length | 9.6 in × 9.6 in |
| Shipping weight | 0.91 kg |
| Package size | 284 × 274 × 55 mm |
| More details | |
| BIOS | AMI 32 MB AMI UEFI ACPI 6.4 SMBIOS 3.5 UEFI 2.8 Plug and Play (PnP) PCI FW 3.3 |
DDR5 ECC DIMMs are solid-state with no moving parts and are rated for the server's lifetime; reseating is only needed if a slot or module fails, which is rare under normal operation.
The CPU's own 95W TDP ceiling is the first limit; the board's VRM and heatsink are designed for that envelope, so sustained load stays within spec unless airflow is blocked.
The board has no onboard fans; noise and heat depend on chassis fans and CPU cooler. The C266 chipset and dual M.2 slots add minimal heat, so a well-ventilated case keeps temperatures low.
More in Server & Workstation Boards
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?