We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Y-splitter cable NEMA 5-15P plug to three C13 sockets 6ft

TeKit

TeKit JD3266 NEMA 5-15P to 3× C13 Y-splitter cable 6ft

SKU CH-9MC1-N0GWT

A NEMA 5-15P to three C13 Y-splitter cable that powers three monitors or C13 devices from one 125V 10A outlet using 16AWG input and 18AWG output leads

  • Connector count4
  • Connector detailsNEMA5-15P MALE TO 3xC13 FEMALE
  • Connector genderMale to Female
  • Product typeCable Splitters
  • Product colorBlack
  • Overall length6 ft/2M

Length 2m

  • Powers three C13 devices from one NEMA 5-15P outlet
  • Rated 125 V 10 A for healthcare, education and commercial use
  • 16 AWG supply leads and 18 AWG branches handle the load safely
  • Y-splitter design frees outlets on strips, PDUs or wall sockets
  • Six-foot length reaches three monitors without cable strain

Three-device power from one outlet

This Y-splitter cable converts a single NEMA 5-15P plug into three C13 female connectors, letting you run three monitors, a PC and monitor, or any trio of C13-equipped gear from one wall socket. It is built for setups that need multiple displays or peripherals without hunting for extra outlets. The six-foot length gives enough reach for typical desk or rack layouts. Rated at 125V 10A, it suits office, healthcare and education environments.

16 AWG feed and 18 AWG branches

The main cord uses three 16 AWG conductors while each C13 leg uses 18 AWG, matching the current rating without unnecessary bulk. Black PVC jacket resists scuffs and blends with standard equipment. Molded strain relief on every connector prevents the cable from being pulled loose when monitors are repositioned on arms. The layout keeps the three branches tidy, reducing clutter on power strips, surge protectors or PDUs.

Replaces three separate cords

Instead of occupying three outlets with individual IEC cords, this splitter consolidates them into one plug, freeing space on crowded strips or rack PDUs. The jump is worth it when you have limited outlet count and multiple C13 devices that stay powered together. It does not suit buyers who need independent switching for each device or who require a higher amperage feed than 10A.

How it compares

Measured against everything we stock in PC & Server Extension Cords, at today’s prices. Recalculated every night.

Price $18.99
Pricier than about 67% of the 401 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTEKIT
Model nameJD3266
Product typeCable Splitters
Product colorBlack
Ports & slots
Connector count4
Connector detailsNEMA5-15P MALE TO 3xC13 FEMALE
Connector genderMale to Female
Size & build
Overall length6 ft/2M

Other versions of this model

5 more in the same range

Questions about this item

What voltage and current does the NEMA 5-15P plug on the JD3266 handle?

The NEMA 5-15P plug is rated for 125V at 10A, matching standard North American wall outlets.

How much space do the three C13 connectors and Y-junction need behind a monitor arm?

The splitter uses 16AWG wire to the plug and 18AWG to each C13, so allow room for the Y-junction and three connector heads near the monitors.

How do I connect the JD3266 so the cable does not pull on the monitor ports?

Plug the NEMA 5-15P end into the outlet first, route the 6ft cable along the arm, then attach each C13 to the monitor — supporting the Y-junction prevents strain.

More in PC & Server Extension Cords

Similar items