We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft Y-splitter cord with NEMA 5-15P plug and four C13 sockets

TeKit

TeKit JD3270 10ft NEMA 5-15P to 4x C13 Y-splitter power cord

SKU CH-VG6D-1K6M9

Splits one wall outlet into four C13 sockets to power monitors and computers from a single 10 ft cable rated 125 V 10 A

  • Connector count5
  • Connector detailsNEMA5-15P MALE TO 4XC13 FEMALE
  • Connector genderMale to Female
  • Product typeCable Splitters
  • Product colorBlack
  • Overall length10 ft/3M

Length 3m

  • Powers four monitors from one outlet using NEMA 5-15P to 4x C13 Y-splitter
  • 10 ft length gives extended reach for secure four-monitor arm setups
  • Reduces cable clutter by consolidating four C13 devices into a single plug
  • Frees outlets on power strips or PDUs with 5-connector Y-cable design
  • Rated 125V 10A with 16 AWG input and 18 AWG output wiring

Power four monitors from one outlet

This TeKit JD3270 splitter cord connects four C13 devices to a single NEMA 5-15P wall outlet or power strip. It is designed for users who need to power a multi-monitor workstation, a computer with peripherals, or similar equipment from one convenient location. The 10ft length provides flexible routing for desk or rack setups.

Rated 125V 10A for safe operation

The cable uses 16 AWG conductors on the NEMA 5-15P plug side and 18 AWG conductors on each C13 branch. This construction supports the rated 125V 10A load across all four connected devices. The Y-splitter design distributes power cleanly without placing mechanical strain on the individual connectors during normal use.

Replaces four separate power cords

This single cord eliminates the need for four individual C13 cables running to a crowded power strip or PDU. The upgrade is worth it when outlet space is limited or when cable management behind a multi-monitor array becomes difficult. It is not suited for devices requiring a higher amperage rating or a different connector type than C13.

How it compares

Measured against everything we stock in PC & Server Extension Cords, at today’s prices. Recalculated every night.

Price $16.99
Pricier than about 60% of the 401 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameTEKIT
Model nameJD3270
Product typeCable Splitters
Product colorBlack
Ports & slots
Connector count5
Connector detailsNEMA5-15P MALE TO 4XC13 FEMALE
Connector genderMale to Female
Size & build
Overall length10 ft/3M

Other versions of this model

5 more in the same range

Questions about this item

How do I plug the single NEMA 5-15P male end into a standard 125V wall outlet and route the four C13 branches to my monitors?

Insert the 5-15P plug fully into the outlet, then connect each C13 female connector to the matching inlet on a monitor or device; the 10 ft length lets you reach four arms without pulling tight on any branch.

Will the 16 AWG supply wires and 18 AWG branch wires need replacement after heavy use?

The cable uses 3×16 AWG on the inlet side and 3×18 AWG on each C13 leg, rated for 125 V at 10 A; no user-serviceable parts exist, so replace the whole assembly if insulation cracks or connectors loosen.

What is the maximum continuous load before the 10 A rating becomes the limiting factor?

The splitter is rated 125 V 10 A total; drawing more than 10 A combined across all four C13 outlets will exceed the rating and can cause overheating or tripped breakers.

More in PC & Server Extension Cords

Similar items