We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white SATA cables with locking latches

THE ORDINARY

THE ORDINARY SATA Cable III 3-Pack 6Gbps Locking Latch 50cm White

SKU CH-CBS2-V90GS

Three white SATA 3 cables with locking latches, each 50 cm long and rated for 6 Gbps transfer speeds

  • Product colorWhite
  • Transfer a 1 GB file in about 5 seconds with SATA 3.0 6 Gbps speed
  • Locking latches on both ends keep connections secure during data moves
  • Three white cables in one pack supply spares for multiple drives or RAID builds
  • 50 cm length fits standard internal drive bays without excess slack
  • Backwards compatible with SATA I and SATA II devices for broad system support

SATA III 6 Gbps three-pack

This set includes three white SATA 3 cables with locking latches, each 50 cm long. They connect motherboards or host controllers to internal hard drives, SSDs or optical drives. The 6 Gbps interface is backwards compatible with SATA I and SATA II. A cost-effective bundle for upgrades, replacements or RAID configurations.

Replaces worn or missing SATA leads

Use these cables when existing leads are damaged, too short or lack a locking mechanism. The latch secures each connection against vibration or accidental disconnection. The jump is worth it when you need reliable 6 Gbps throughput for modern SSDs or hard drives. Backwards compatibility covers older SATA I and SATA II ports without adapters.

Sustained 6 Gbps transfer under load

The locking latch maintains signal integrity during continuous read and write cycles. Each cable supports the full SATA 3.0 specification for consistent performance. White colour simplifies cable identification inside the chassis. The 18-inch length suits typical motherboard-to-drive routing without excess slack.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $14.99
Pricier than about 55% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Product colorWhite

Questions about this item

What spacing do the straight SATA connectors need to fit between my motherboard and a 50 cm drive bay?

Each cable is 50 cm long with straight connectors on both ends, so measure the straight-line distance from the motherboard port to the drive bay to confirm clearance.

How do I engage the locking latch correctly when plugging the cable into a SATA 3.0 port?

Align the connector, push straight in until the metal latch clicks into the port notch, then tug gently to verify it is locked before routing the cable.

When should I replace one of the three white cables in a RAID array?

Replace a cable if the locking latch no longer clicks securely, if the connector pins appear bent, or if the system reports intermittent link errors on that drive.

More in SATA & eSATA Drive Cables

Similar items