We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thinkstar USB 3.0 to SATA 22 pin 2.5 inch adapter cable

Thinkstar

Thinkstar USB 3.0 to SATA 22 Pin 2.5 Inch Hard Drive Adapter

SKU CH-EV6S-QRXN0

Connects 2.5 inch SATA drives via USB 3.0 using a 22 pin connector

  • Connect any 2.5 inch SATA drive via USB 3.0
  • 22 pin connector fits standard laptop hard drives and SSDs
  • Pocket size at 1.97 inch cube weighs only .06 lb
  • Plug and play with no external power needed for most drives

USB 3.0 SATA adapter for 2.5-inch drives

This Thinkstar adapter connects a 2.5-inch SATA hard drive or SSD to a computer through a USB 3.0 port. The 22-pin connector carries both data and power so no separate supply is needed. It weighs 0.026 kg and measures 1.97 in on each side. The compact design suits quick data recovery, cloning or temporary external storage.

For laptop drive access and occasional transfers

The adapter fits users who need to read a 2.5-inch SATA drive from a desktop or another laptop without opening a case. It is not for 3.5-inch drives that require external power. It is not for M.2 or PCIe drives that use a different connector. It is not for permanent enclosure use where a dedicated dock would be more robust.

How it compares

Measured against everything we stock in SATA, IDE & M.2 Drive Adapters, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 93% of the 1,721 comparable items (median $22.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Does my 2.5 inch SATA drive need its own power supply to work with this USB 3.0 adapter?

The adapter connects a 2.5 inch SATA drive directly to a USB 3.0 port, drawing power from that port so no separate supply is needed.

Will a 2.5 inch SATA drive with a 22 pin connector fit this adapter without an extra cable?

Yes, the 22 pin SATA connector on the adapter plugs straight into the drive, so no additional cable is required.

More in SATA, IDE & M.2 Drive Adapters

Similar items