We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular PCB hub with ten 4-pin fan headers and SATA power connector

Vszerda

Vszerda 10 Port PWM Fan Hub SATA 15pin to 10 Fan Splitter Cable w/ Self-sticker

SKU CH-6MKP-DFX5R

Expands one PWM header to ten fans, powered by SATA with self-stick mounting

  • Expands one PWM header to control ten fans
  • SATA 12 V power reduces motherboard load and heat
  • PWM fans share speed control via single controller
  • Individual capacitors on every output protect connected devices
  • Self-adhesive backing allows flexible mounting inside the case

PWM hub for multi-fan builds

This PWM hub expands a single motherboard header to ten 4-pin connectors so systems with many fans or large radiators can run all units from one control point. It draws 12 V power directly from a SATA 15-pin PSU cable, removing the load from the motherboard. Enthusiasts who need centralised speed management for up to ten fans will find it practical.

PWM control limited to one RPM signal

Only the red header passes an RPM signal back to the motherboard, so the board can monitor just one fan while the other nine follow the same PWM duty cycle. Three-pin fans connected to any port run at full speed because they lack PWM control. Builders who require individual speed curves or RPM readings for every fan cannot achieve that with this hub.

Compact PCB with adhesive mounting

The board includes a capacitor on each of the ten outputs for stable power delivery. A self-sticker lets you secure the PCB out of sight behind a tray or on a radiator shroud. The 16 inch PWM lead reaches most motherboard headers in mid-tower cases, and the SATA power plug connects directly to the PSU without extra adapters.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 91% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose this 10-port hub or a smaller splitter for my build?

This hub expands one motherboard PWM header to ten fan outputs, each with its own capacitor, and draws 12 V power from a SATA connector instead of the board.

What does the PWM function actually do once the hub is installed?

Four-pin fans connected to the hub follow the motherboard PWM curve; three-pin fans run at full 12 V speed because they lack a PWM control line.

How does the SATA 15-pin power connection limit the hub in practice?

All ten fans share the single SATA 12 V rail, so total current draw is capped by that connector and the PSU cable feeding it.

More in Internal PSU & Riser Cables

Similar items