STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A two-pack of 0.5 m Mini SAS HD SFF-8643 to four SATA breakout cables with locking latches and braided 30 AWG conductors
This two-pack provides two 0.5 metre cables that split a single SFF-8643 Mini SAS HD male connector into four SATA 7-pin female connectors. They are designed for system builders and storage professionals who need to connect a SAS RAID controller or HBA to up to eight SATA hard drives or SSDs using both cables.
Each cable uses thin, flexible 30 AWG copper conductors wrapped in a braided sleeve for durability and easier routing inside a chassis. Both the SFF-8643 host end and the four SATA target ends feature locking latches to maintain a secure connection under vibration or during drive swaps.
The SFF-8643 male connector plugs into a 12 Gbps SAS HBA or RAID controller, while each of the four SATA 7-pin female connectors supports a SATA III drive at up to 6 Gbps. Note that the Mini SAS HD connector must not be plugged into a backplane, or the cable will not function.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | HD MINISAS-004 |
| Product type | Mini-SAS Cables |
| Product color | Black+Blue |
| Size & build | |
| Conductor type | Copper |
Connect the SFF-8643 male end to the SAS RAID controller or motherboard and the four SATA 7-pin female ends to the drives; the step often missed is ensuring the locking latches on both the Mini SAS HD and each SATA connector click fully into place for a secure link.
The braided 30 AWG copper conductors are passive and require no scheduled maintenance; replacement is only necessary if the locking latches break, the braid frays, or a connector pin is bent during a drive swap.
Each SATA lane is rated at 6 Gbps while the SFF-8643 host side supports 12 Gbps SAS, so the per-drive 6 Gbps SATA ceiling is the first bottleneck when all four drives are active continuously.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?