We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda Mini SAS SFF-8643 to four SATA cable, .5 m length, black connectors

Vszerda

Vszerda Internal HD Mini SAS Cable 0.5M / 1.6FT SFF-8643 to 4X SATA Cable

SKU CH-CCRS-635Y2

Connects a Mini SAS SFF-8643 host to four SATA drives over a 0.5 m 1.6 ft cable

  • Connect four SATA drives to one SFF-8643 port
  • 5 m length keeps internal routing tidy
  • SFF-8643 host connector fits modern RAID controllers
  • Supports 12 Gb SAS throughput for fast data access
  • Hybrid cable design eases 6 Gb to 12 Gb transition

Cable purpose and audience

This SFF-8643 to 4x SATA cable connects a Mini SAS host port on a motherboard or RAID controller to four SATA hard drives. It suits builders adding multiple drives to a server or workstation that uses an internal SFF-8643 connector.

Who it fits and who it does not

The cable works when the SFF-8643 port is on the host side such as a controller card or motherboard header. It will not work if the SFF-8643 connector sits on a backplane or drive enclosure because the signal direction is reversed.

Checks before ordering

Verify that your motherboard or RAID controller provides an SFF-8643 host port and that the 0.5 m length reaches your drive bays. Confirm each target drive uses a standard SATA data connector and that no backplane sits between the controller and the drives.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $17.99
Pricier than about 67% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What controller or motherboard port must I already have to plug in the SFF-8643 end?

You need a Mini SAS SFF-8643 host port on your motherboard or RAID controller.

Will this cable work if I keep my existing SATA hard drives?

Yes, the four 7-pin SATA connectors attach directly to standard SATA hard drives.

How can I verify the link is running at 12 Gb after installation?

Check the controller BIOS or OS utility for a negotiated 12 Gb link speed on each attached drive.

More in SATA & eSATA Drive Cables

Similar items