We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Multicoloured Mini SAS SFF-8087 to four right-angle SATA cables, 100 cm long

Vszerda

Vszerda LMNSASFF8087-4PST7PR Mini SAS SFF-8087 to 4 SATA 7P Right Angle Cable 100CM

SKU CH-2V83-A3DS2

Connects Mini SAS controllers to four SATA drives at 6 Gbps per port with EMI shielding and angled connectors for tight server builds

  • Connector detailsMini Sas Sff-8087 to Sata 7p Right Angle
  • Connector genderMale-to-Male
  • Product typeMini SAS to SATA
  • Product colorMulticolored
  • Overall length18
  • Key featuresEMI shielding, angled connectors, durable construction for e
  • Up to 6Gbps per SATA port with SAS 3.0 compliance
  • EMI shielding prevents interference in dense server environments
  • Left-angle Mini SAS and right-angle SATA connectors ease tight routing
  • Durable construction withstands heavy enterprise workloads
  • 100cm length suits high-density RAID and virtualization setups

Mini SAS SFF-8087 to 4 SATA breakout cable

This 100 cm cable connects a Mini SAS SFF-8087 host port to four SATA 7-pin devices. It is built for enterprise servers and workstations that use SAS 3.0 controllers with 6 Gbps per channel. The male-to-male design features a left-angle Mini SAS connector and right-angle SATA plugs. Multicolored wires simplify port identification during installation.

Suited for RAID controllers and dense server chassis

The angled ends reduce strain and improve routing in tight enclosures such as 1U or 2U rackmount systems. EMI shielding maintains signal integrity in electrically noisy data-centre environments. Builders using straight Mini SAS ports or SATA controllers without an SFF-8087 interface will need a different cable assembly.

SAS 3.0 compliance at 6 Gbps per SATA port

Each of the four SATA channels supports up to 6 Gbps data transfer under the SAS 3.0 specification. This single speed rating determines whether the cable matches the performance envelope of the attached controller and storage devices.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $22.99
Pricier than about 80% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameST-JY
Model nameLMNSASFF8087-4PST7PR
Product typeMini SAS to SATA
Product colorMulticolored
Ports & slots
Connector detailsMini Sas Sff-8087 to Sata 7p Right Angle
Connector genderMale-to-Male

Questions about this item

What controller interface is required to use the Mini SAS SFF-8087 connector on this cable?

A RAID controller or HBA with a Mini SAS SFF-8087 port is needed to connect the cable's left-angle Mini SAS end to the host system.

Will the SATA 6Gbps per channel speed work with older 3Gbps SATA hard drives I already own?

Yes, the SAS 3.0 interface is backward compatible, so 3Gbps SATA drives will operate at their native speed when connected through the four right-angle SATA 7P connectors.

How can I verify the cable is delivering 6Gbps per port after installation?

Check the controller BIOS or OS disk utility to confirm each attached drive negotiates a 6Gbps link rate on its SATA port.

More in SATA & eSATA Drive Cables

Similar items