Vszerda MCIO SFF-8654 8i PCIe 5.0 to 8x SATA 7P Right Female Cable 80cm

Eight-drive SATA breakout cable

This cable adapts a single MCIO SFF-8654 8i port into eight SATA 7-pin right-angle female connectors. It suits server and workstation builders who need to attach multiple SATA hard drives or SSDs to a modern backplane or controller. The 80 cm length gives routing flexibility inside 2 U and larger chassis. No active components are required for the conversion.

Passive thermals and power profile

As a passive copper assembly the cable adds no fans, pumps or active circuitry, so it contributes zero acoustic noise and negligible heat. Power draw is limited to the signal-level consumption of the PCIe 5.0 lane drivers at the host side. The right-angle SATA ends reduce cable stress and help maintain airflow around dense drive bays.

Sustained 16 Gbit/s throughput

The harness is rated for 16 Gbit/s per lane, matching PCIe 4.0 electrical performance across all eight channels simultaneously. In continuous read or write workloads spanning multiple drives the aggregate bandwidth remains stable because no protocol conversion or buffering occurs. Builders who require PCIe 5.0 signalling rates or active signal retiming should verify controller compatibility before deployment.