Vszerda Mini PCI-E mSATA to 1.8" Micro SATA 16Pin Adapter sata cable
Converts an mSATA SSD to a 1.8" micro SATA 16-pin connector using a copper conductor
- Connector detailsMSATA-MICRO SATA
- Conductor typeCopper
- Converts mSATA SSDs to 1.8" Micro SATA 16-pin interface
- Copper conductor ensures reliable signal transmission for compatible drives
- Compact 3.94 x 3.94 x .39 inch form factor fits tight spaces
- Lightweight .71 ounce design adds minimal weight to portable systems
- Compatible with Intel mSATA, Samsung PM800, and Toshiba mSATA SSDs
Compatibility with mSATA SSDs
This adapter connects an mSATA solid-state drive to a 1.8-inch micro SATA 16-pin interface. It supports Intel mSATA series, Samsung PM800 series and Toshiba mSATA SSDs. The copper conductor carries SATA signals through the compact circuit board.
Not for standard SATA drives
Builders who need to install a 2.5-inch or 3.5-inch SATA drive cannot use this converter. It also does not suit systems that require a full-size mSATA slot without the 1.8-inch micro SATA connection.
16-pin micro SATA connector
The adapter provides a 16-pin micro SATA receptacle that matches the 1.8-inch form factor. This single interface determines whether the target device can accept the mSATA drive.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Chenyang |
| Model name | CY-SA-119 |
| Ports & slots | |
| Connector details | MSATA-MICRO SATA |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How do I connect the mSATA SSD to the 1.8" Micro SATA 16Pin adapter?
Align the mSATA edge connector with the Mini PCI-E slot on the adapter board and press down firmly until it clicks into the retention clips.
Will the copper conductors on this adapter degrade and need replacement?
The copper conductors are solid metal and do not wear out; only physical damage to the board or bent pins would require a new adapter.
What is the first limitation when running sustained transfers through this adapter?
The throughput is capped by the SATA interface speed of the connected mSATA SSD and the 1.8" Micro SATA host controller.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III





